I want to overlay my console with a piece of carbon just for looks. The plan was to lay the carbon/aramid ?5 oz on top of a 6 oz woven and use...
My boat is a 24' catamaran, and it has a 7m / 23ft rotating mast. The mast is aluminum, and a section dimension is 120mm x 80mm. It rotates on a...
Hi, I would like to put a let's say "yacht-like construction" into the earth without having it rotting away in a year or two.. The...
We are offering quality epoxy, polyester resins and gelcoats for efficient pricing. Fiberglass Carbon fiber and tooling. Small amounts and full...
Hello to all, and a huge "thank you" for all amazing contributions. I have been reading, lurking and absorbing as much of your shared knowledge as...
Hey everyone! If you want the easiest, strongest, and best product to repair your transom with, take a look at CarbonBond Pourable Ceramic Transom...
Want to build some carbon items... I see you can purchase carbon tubing for about 10 bucks a foot for 1/2" tube. I want to do some things in...
Hi guys, looking for advice on boat building via mould. Firstly an intro, we are a university team building a 'water-bicycle'. Basically a...
I'm dismantling a 50ft Lexen race boat and have a 22.3m Carbon mast fully rigged with sails etc. Fractional,deck stepped,rod rigging. $22500 Also...
Interior looking aft.
Interior looking forwards. Fresh water tank is built in under the bunk.
Design & Rendering by Mehmet Kamer Sarpkaya Super Sport Motoryacht +40 knots max speed Construction: Laminated Mahogany /...
Very traditional galley lay out only that everything is laminated from carbon sandwich panels with foam core. Even the ice box!. The whole bench...
The rudder blade of the Bondi 36. The stock was laminated around a CNC machined foam core. The core was geometrically the most complicated part of...
View of the cockpit area when the deck was first fitted to the hull. The mass of the complete deck is just under 200 kg and features carbon skins...
View of the interior without deck of the Bondi 36. All components are carbon sandwich with foam core. In the aft cabin area the water ballast...
Curing of the deck bond under vacuum. The collision bow area was laminated at the same time. The collision bow was laminated over a foam core...
A personal project exploring Catamaran Yacht design I'm. Would like to explore a few more layouts and looks with this and then jump into some CAD...
Lots more photos here: http://www.zyvexpro.com/news/540SE/540SE_renders.html Looks interesting- my company is doing some of the work on it. It...