I designed and built this boat
This lobsterboat hull motorboat I designed and built was perhaps the only such craft ever made here to have been sold & exported to the...
back in 1999
we over-built? this Pilot Cutter 32 ft LOD hull in routered strip planking to 2 1/2". Douglas fir under LWL; and White Spruce topsides;...
Pilot Cutter epoxy strip planking and cold molded; was built in Institutul de Ape Bucharest Romania 1999; for American Randy willard.Rudder...
http://www.yacht.ro
Clear coated Mahogany cabin sole; mahogany tops and sides berths ; Moonlight opening ports; Stainless hardware teak@epoxy louvered door at...
it was before the advent of digital camera revolution. I designed the interior of this boat in a classic style. Looking aft through...
mahogany top charts&cofee desk teak louvered doors and hatch composite console portside sliding cold molded lateral windows opening front...
I designed twin consoles into the bathroom at the forward section of the hull ; supporting the sink and acting as an extension of the bed on...
transom was rebuilt and cold molded; the topsides were painted with epifanes; boottop painted blue; name is here being re-painted. this was the...
Lead ballast has been re-fastened by custom made bronze bolts, copper antifouling paint under the LWL; topsides were painted and polished, new...
Western Red Cedar "frameless" strip planking fiberglass &epoxy sheating 36 ft cruiser racer . Minimal framing is going to...
west system cold molded over strip planking. stem; keel and stern post oak &epoxylaminated; wooden dowels and bronze screws reinforced....
most framing , most floors and 70% planking were rebuilt in laminated ash epoxy capsulated; the hull was rolled on two massive wood wheels; in...
first we took the paint off the entire hull and deck. the hull structure is resorcinol one layer of 10mm cold molded mahogany over inner 9mm...