http://www.boatdesign.net/forums/boat-design/easy-build-but-ugly-bad-idea-37044.html#post448941
"AND IF YOUR BACKUP CHUTE FAILS, YOU HAVE THE REST OF YOUR AIRBORNE LIFE TO REEL IT BACK IN AND THROW IT OUT AWAY FROM YOUR CHEST" (END DRILL...
I have unfortunately never been sailing. only in the last year or so have i picked up the interest. Ive driven houseboats, jetboats, waverunners,...
Let me know when you're ready for a real live test cripple and I'll drive down from Sacramento :)
back when I was a welder/machinist we had to occasionally cast our own pieces. one of the more important steps that most laypersons didnt...
an idea that I've been pondering since I heard about it would be to use parafin/wax and lead shot/bb's to keep things in place. Mix molten wax...
as built weight is EVERYTHING. you can run all the theoretical numbers you want through a program to get your curve. But what you end up with is...
the i550 is one of 3 boats I've been doing alot of research into. Personally I think it is gorgeous. Angular and aggressive. Not to say that a...
yup, i enjoy the mental excercise, took about 10 minutes to sketch up. but as i said I'm no naval architect (yet) i was just trying to give you an...
8'x24' simple barge. 8" draft at 8000lbs. sleeping room for 11 if you toss down cushions on the floor. portapoty out back. 6+ feet of headroom....
what kind of use are you looking for? A comfortable day sailor, or speed deamon, etc? Slider <- a simple, ply/glass/epoxy design
in that sketch there is 0 rocker, but the bottom (orange) of the hull is narrow enough that i'm not worried about slamming, plus the lakes around...
I have an irrational fear of bridgedeck structures on small cats... :) think something like this would work a little better? (still...
*rig not to scale I just put something up there to get the picture in my head. I guess the number one requirement for the rig is ease of...
Hello, As with all of us who are just starting out my visions of "Ideal" have changed significantly since I first started dreaming of heading...