Jango, I'm pulling the trigger, I found the correct prop on ebay:...
Ok, here's what I've found: Volvo props seems to max out in diameter at 16", leaving me the option of a 16 x 13 or 16 x 15. I think the leg is...
Jango, Thanks so much! May I ask what "55% D.A.R." is? I definitely understand the 16.5 x 13 pitch, already shopping for one!
[IMG] Pictured above is what my mangled prop looked like, I've pulled it, and will have it rebuilt as a spare. Does anybody have a...
I own a 1978 Fiberform Baja 2650, apparently it is the "Chinook" model. The boat is 28' LOA, has a flybridge, and a single Volvo 255hp with the...
long time no posting.... Just as a follow up, I did a haulout this week, and found out that the leg is fine (it is a 1.61 ratio). The prop...
Knotty, Thanks, I absolutely agree. The correct WOT operating RPM on my other 350ci was 4400 as you said before. I feel like this motor is...
baeckmo, thanks for the insight, I'll take a look at the leg stamps tomorrow, and if they are in fact unreadable, I'll compare my timing hash mark...
I should add that the outdrive has no trim, it's either "up" for a haul out, or down for operation as it was designed. Yes the boat does have...
Hi all, I have a 1978 Fiberform Baja 26' Command bridge, the dry weight of the boat is approx 5,900lbs + .5 tank of gas (85 gallon tank) and...