I've been thinking about this option a bit. I've found a couple others as well. 6 Quality Mid-size Cruisers | Cruising World...
All, A quick update as I am still interested in this and wish to document my journey a bit. Over the past couple years, I have been reading the...
I feel the same way generally, but with the titanium boat linked by old multi that shouldn't be a problem. Welding characteristics should also be...
Do you have any idea of the cost of this in comparison to a high end composite? say Carbon Fiber?
I proposed something like this a couple of years back. See the below screenshots of my shitty design and the thread.....
I could see that for something in the 12-15 foot wide range. When you hit 25 feet and 60 miles to the nearest boat ramp..
I've been following their journey closely. It's still going to take them around 2+ years to finish the boat at the boat yard. I wouldn't design...
Before my now pending divorce, I had estimated about $650k - 750k for the waterfront house in my area with sufficient area to build a 40x60 shed...
The dream situation would be somewhere that I could pull the cat up a ramp and store it right next to the barn I built it in. My other love is...
I've been looking at that option as well. Unfortunately I live in a relatively high COLA location with lots of cliffs.
Thinking of logistics prior to a house purchase that will enable the build. My dream is a raku 52, but I'm going to start with some smaller stuff.
Was thinking about methods of transporting a homebuilt catamaran from somewhere not close to the ocean.. Seems like heavy lift helicopter might...
Like this on mobile.
I noticed that the VMV cat has a solid bridgedeck to the transom. Obviously not having a solid bridge deck at the bows is important, but how...