Thanks David, im sailing in the Greek Islands at the moment, finding the right things to do the job with is not always easy here,im installing a...
just water, no aceatone?
Will these products take the scratches out of my hatches?
thanks!!
WIll gelcoat stick to epoxy? Im instaling a hatch and need to do a 2 inch strip?
Im fine not using gel coat, paint will work fine- should I sand it down at all its pretty rough as it is before I add resin? What is Blush ??...
Need Advice about Epoxy and cloth I m putting a new deck in my commercial dive boat, it’s taken a lot of abuse and I expect this to continue- so...
4 quarts in 3 hours says your lucky to go 1 mile-
I just got rid of 90 gallons of fuel this week by calling the waste management company - I took it to the county land fill where it was off...
Thanks Mark , it had many failures from around the hatches were worn thin from years of tanks being dropped/slid/divers/ and then holed & some...
Hi Guys! I’m New to the form and to fiberglass work- I’m working on a project and would appreciate your advice! I’m replacing a deck on my...