Firstly, thank you for your thoughts and response. By partial penetration weld, I mean any groove weld that does not penetrate the full...
Thanks for the response. I guess to expand a little bit, I already have design drawings with the weld prep being a 3/8" single bevel with...
Hi, long time no post! Should steel bollards on a tug boat always have a partial or full penetration weld when welded directly to the deck...
Hi all, Wondering if anyone would be able to share any structural midship drawings for offshore supply/support operations vessels. I've done a...
Ad Hoc, this is exactly what I was asking for. Not saying this is the only way to go.
Thanks (again) for the great responses Ad Hoc and TANSL. Just for the sake of this thread, I've attached what I found in ABS. Cheers
I am indeed a Nav Arch student. I appreciate your answer. Indeed, the availability of types of stiffeners would affect section moduli and hence...
Thank you, I really appreciate you sharing that ratio that may be correct. Exactly the type of knowledge I was hoping a senior member to drop....
Hello all, Very general question I guess, but I'm wondering if supply vessels, say 80-90m would usually be transversely framed. If so, what could...
@TANSL @gonzo Many thanks to you both. Cheers
