If I decide on a sealed deck, how do I determine if the hull is epoxy or poly?
Got about 60mm wide bearers for the deck all heavy laid up glass from new. Was originally build as a dock workboat for laying moorings
Kinda envisioned cutting the sheets to size. Priming with a coat of poly in the workshop and then fitting in the boat on a nice day and lay up the...
I only thinned the epoxy for the sheets of ply I used to make engine boxes and wheelhouses. Purely for weatherproofing. It works really well for...
Its about 12ish sqm . summer coming up so usually high teens low 20s most of the time. Can go to high 20s . I'd finish the top with non slip grey...
What would you suggest? Couple of layers of 450g ? Or would 3x 300g?
Would probably want to topcoat it all in a grey anyway. Used to use a lot of poly about 20 yrs ago roofing but single ply is a better product for...
I mentioned saturating because its worked extremely well in a few other projects but they have been wheelhouses and engine boxes. Not heavy wear...
Looking at adding to the fleet with an old colvic 26 open boat. At the moment it has loose ply deck boards. They need replacing so the choices are...