I’ll find some specs. Everything I read, said it works just like eglass.
Only difference between Sglass and basalt is
Link to a pdf...
Thanks again, not Much experience with foam core. Most of my limited experience is infusion and prepreg.
I’m going to continue to research that...
Prob better safe then sorry. I agree I’ll use the 10
now it’s the skin weight
400 or 600
Basalt or eglass need to do more research on basalt...
I understand what your saying.
I’m agreeing with what has been said previously.
I want to use the lighter skins, but with more strength then...
I’m going to run a test any help will be appreciated..
I’m going to do 3x1 ft test panels
8mm strucell foam
You are right, I just reconfirmed with an email I received from the designer..
8mm with 600
10mm with 600
10mm with 400 (light...
Weight savings was my attention. by using the p80 I figured the 8mm would be acceptable?
So let me ask, I assume you would pick P80 10mm foam...
Thanks, I re-read this advice From you and it seems solid.i have also read the link you furnished a few times also in the past.
I’m going to go...
Good stuff in the link! I just started studying it!
Thanks, you could very well be right. I just want to make my own carbon mast and prove the technique. If I fail, it’s only money...I’m pretty sure...
There is a YouTube vid showing a guy testing it with rolling. He did a test, one side rolled another side rolled and tipped. He found the tipping...
Appreciate your advice. Somethings are already decided
Stru cell p60 8mm
Going to use sglass For the extra benefits, with the 8mm foam....
Humm so if I don’t worry about setting up a bag over the hulls
And I use 10mm and 400
I save around 30# a hull
So 60 lbs....
I guess the benefit...
I have two foam options it seems
8mm with (600)
Which would you prefer?
hope all is safe
Morn. From the left side of the pond, afternoon on the right
A question before I move forward with researching this mast build.
For a boat the...