There is a huge difference between 9.8 and 8.0 CR Work with a competent engine builder and you will be amazed at the power increase. Cost won't...
They are probably all right to some extent. A lot depends on the company that marinizes the engine as well. As far as parts: they are...
http://store.summitracing.com/default.asp?Ntt=marine+carburator&searchinresults=false&Ntk=KeywordSearch&DDS=1&N=115&target=egnsearch.asp I...
Well I am buying an old marina. It is full of derelict boats. I am sure in a month or two I will have a few that I will sell cheap :)
In my experience the car carburator runs way too rich. Granted I usually use quadrajunk. The power valve on them pops open and stays thaty way on...
Well if you use the Vdrive and decrease the angle it will move the engine and transmission forward to compensate without the huge move necessary...
The struts come in standard sizes. http://www.glen-l.com/inboard-hdw/struts.html#0127 I would mark where you want to mount the engine then...
Man if you gonna bang me for spelling on a quick thing like this I hate to see you TXT message. Do you think you are l33t? As far as...
That is good news. From the media I thought global warming was a big issue but if the air is cleaner then global warming is going away. Unless of...
I am not thrilled with all you wrote. First off 1:1 is ok for an inboard. 1.5:1 is ok too but 2:1 is too much for that light boat. Proper props...
This page list it at #525 assembled, they list the LS1 at #397 so you would save roughly 125 LBS per engine....
I never said it couldn't compute there are just other sensors besides O2. You have throttle position, MAP or Manifold Absolute Pressure or the...
I could be wrong but I think an O2 sensor is virtually worthless in a marine application. The systems I've used go into an open loop condition...
What if you limit the capabilities of the boat and as a direct result human lives are lost? I think it is better to manage the resources.
Just because it is alminum doesn't mean it is OK to splash salt on it. The aluminum alloy is different on your Marinette. It is specifically...
