Sorry for abandoning this thread, but I thought I should at least post a closer for those who are interested. Here is me and my boat, not a...
This is over the outside of the entire hull, a 18 ft long canoe. It's only really bad in that one area, and there is a good piece of tape on...
That picture is of the worst affected area, but you are right, it is not good. I am also taping the chines inside and out, so that will give me...
It is structural. How bad would it be to leave them? I have poured more epoxy on them and it has taken SOMEWHAT... Not entirely but better than...
Grind off the entire cloth and start over? Or grind off the parts where it is unwetted and patch it?
Hey all, I have had a small problem with the application of a fiberglass cloth to my hull. I started late in the day and by the tome I was...
I laid 6inch glass tape down on my last chine yesterday, and it looked thouroughly wetted and successful. When I woke up this morning, there were...
Scot, I think I understand what you are saying about the rudder. Well, maybe not exactly, but I understand the theory... I will see how I am able...
Will my rudder act as a skeg? Or, could I design it in such a way that it acts as one? Okay, I am currently epoxying 6oz cloth on the chines,...
Okay, after agonizing over it for a while, taking the frames out and trying to adjust it, I still came out with about a half inch difference......
Okay, basically you just said what I wanted to hear, so I am glad! There is ample space for epoxy in my joints, but I had been instructed by a few...
Its going well, just got the top panel in and I am sewing it in now. A quick question... How important are spacers? They are a real pain in...
Okay, I have stitched up the bottom panels, and it honestly went together pretty nicely. I do have a few concerns with the alignment - the...