[ATTACH] I am using the fourth from left "All zig-zag" lacing. Seems to work ok.
Actually I think there are no pics BELOW deck but I have taken a few before laying the deck with the interior more or less finished :rolleyes:. I...
[ATTACH] [ATTACH] You mean belowdecks or below waterline?
Performance is as expected for a long keeled gaff sail two-sticker with a LWL of 5,13m ;). On a reach I can make 5.5kn if the wind is 6-8m/s, hard...
[IMG] This is a tribute to PAR who didn't live to see the launch. The original contact between me and Paul was through this forum and the design...
There is no need for two speed controllers in series. If the wireless one can handle the current required you use that alone and dump the other...
If you are concerned about weight you should taper not only the diameter of the mast but also the wall thickness. Same diameter/thickness relation...
I use a 24V outboard with 86lbs thrust to leave and return to marina on batteries. For longer motoring I have a 24V alternator run by a chinese...
Even though it is difficult to define, I would say that UGLY is aa attribute that can alone spoil a design. Even the fastest, seaworthiest...
If it is sold on a European brand name you can at least call the brand owner and make them take the responsibility for their stuff. If they put...
Paul, I think your comparison to software industry was a little superficial and I think your knowledge of of that business is on the same level as...
Here you can have a 20 + 10 liter package with 270€ + shipping. The shop is in Finland. http://www.arsalin.fi/kauppa/index.php I am going to...
Souljour, I was just setting masonite boards on my concrete floor to start lofting. It is still really early phases. I had a go on casting the...
Experience shows that birch plywood is a lot more rot resistant than birch timber. Nobody seems to know why, but different theories have been...
