[ATTACH] [ATTACH] [ATTACH] So, my old steering cylinder from 1986 is leaking. Also the rudder is moved way to easily by the sea, so I am...
How do I know if my Faria gauge is a Chinese knock off? I paid top dollar for it here in Norway about 3 years ago. Have tested it with two...
Did not go boom. Just got powered and resumed alarming. The gauge is as cheap as they come, and is in Chinese ;)
My Faria oil pressure gauge has been acting up lately. The dial goes to max when it is powered, and does not move when the engine starts running....
It worked! Until now... Now it has started leaking again... I realy do not want to take it apart again, as it is quite tricky fitting it back...
The outlet is at the other end, where the exhaust outlet is. So the water will have to move trough all of the manifold even with no pipe.
While trying to tackle an internal leak in the manifold, I decided to remove the pipe. Seems like it has broken off from the inlet stud, and has...
Are you suggesting i glue a thin rope packing up there with hylosil? Or around the tube? :) I had no idea there was an equation behind that :)
Sealant like Hylosil? As the water pump is pretty strong the sealant should be able to cure before starting. But surely the O-rings must be...
They are pressed into each other. The thermostat housing is then secured to the cylinder head with 4 bolts. I believe I have taken care of the...
So, the old diesel engine started leaking coolant from water pump and thermostat housing. There is a pipe connecting the two, with the thermostat...
The outlet pipe for the motor is not every high above drck. About 2 meters. On days with little wind, and days with the "wrong" wind direction it...