If you are interested, I could send you my card board patterns. I've already used them for second project.
here are a couple of pictures of the bottom, at the bow and from the stern. Also a couple of the one piece keel and keelson. I used it over the...
Sorry to take so long for answer. My keel is one piece. I added a 3/4"x3/4" along the side of the keel. One thing for more support the other was...
thank you all for the wonderful comments. I like them all, good or bad. You can learn so much from them. Thank you all again......
It would probally weigh that without seat, floor and if the top was made from plywood. I think I have at least 10lbs of paint on...
Yes it is from a set of plans. Plyak is its name. Free on line. The side are 1/4" 5 ply plywood. 1/2" 5 ply for ribs. Top is white pine and red...
For the size of it, it's pretty heavy. Too many corved surfaces to be car topped. I'll probally end up making a trailer for it. Need two people to...
My question is what is the differance between these lights and mine. I'm sure learning alot about lights from you guys. thank you. Tha one I...
I really hope I helped you.
What you are showing me is the CASTING numbers. That's the numbers that tell you what plant,what time and what day it was cast. The numbers that...
Had to get it done so I could start a new project. Tell me what you think.
Yes there is a separation bar between the lights.Total cost of the of the lights is $3.00
By the way ..... If you get the casting numbers off the block you can call a chevy dealer and they can tell you the replacement..... It has to be...
Just had to replace my block due to cracking. To weld you need to strip the block. When welding the bolck needs to be heated so that it does not...
