So a while back Bob N. from the Coastal Passage chimed in on this thread and threw out the possibility of building this design with foam. I know...
Thanks Paul, these were my thoughts exactly. They make the installs look so easy and I suppose they are when you don't have to worry about...
I am looking for some feedback on installing some LED underwater boat lights. All of these lights require a hole drilled through the hull. The...
So for those who are considering the CSC-30, and looking for some build documentation, I found something the might be a little helpful. I ran...
There are no 2x6's in the plan released by TCP. The issue of 2x6's was discussed earlier in this thread. The design, as published, uses 2x4's in a...
redreuben, I don't think anyone would dispute what you are saying, and that was my previous point, that a boat is a product of build quality,...
Hi Sailhand, It is good to finally have someone who has some seen this design, built, used, etc. So what are the design issues you are seeing...
Hi Limecc, You are right, the 105MC's can be found for a song, but you always have to ask yourself, why is that? Although I have heard several...
I think the biggest issue with this design is going to be its performance in light winds. I took a look at some of the YouTube videos others...
I think if you compare the width of the CSC 30's hulls to other designs that are around the same length you will find that it already has fairly...
I think you would get exactly what you rendered, however I think you might find that the flat bottom will cause issues with pounding in your...
Looking at this plan, I think in terms of hours, yes it is doable if you have some good woodworking skills and stick to a basic interior. In...
I agree, that would seem to be the most logical thing to do. It seems like all the measurements on the plans are a bit off. After my previous...
I started looking at the plans for the CSC 30 as we well, and although most of the plans are fairly straight forward, the sheet "MAIN PANELS" in...
