Herman, Hi!! Was getting my engines rebuilt. That done now, the hull is fully dried up. Will start replacing balsa as required. I did a few...
Need help again!! Have taken skin off from the inner hull ( moist area only), it did not come off easily. The balsa is pale brown but moist. Its...
Thanks!! Got it;);)
Thanks for all your help. I need some more help to select the right cloth. Posting a few pictures. First picture is woven roving 24 oz, plan to...
Few more pictures of work in progress.
They only have Aradur 43 and they use it here. If the heat resistance issue is only when its not mixed? That can be managed.Even once its mixed...
Thanks again for your help.Temp during the day can go upto 45C, I don't know how will that effect low heat resistance? Another question? Workers...
Good Morning!! Here is what I found today. 1.Standard Liquid Epoxy Resin(Bisphenol-A) YD 128 Manufactured by Kukdo Korea. It has excellent...
Yes, will be hand laminating. I have bubble busters but not peelply.
I have not been able to get complete specs for the curing agent. Most of the curing agents are for civil engineering purposes.905-3 from Yun Teh,...
Thanks!! Yes, they have a diluent resin available NPEK 048. The specs are: Low viscosity group ( reactive diluent) made from epoxilation of...
Can Industrial Resin made by Nan Ya (Taiwan) NPEL 128 with cps of 12000 at 25 degrees C, be used for fiberglass work. This resin is used for...
Thanks!! Should I drill a few more holes for it to dry on its own?? Its not rotten yet. There is a possibility I can save the core. This project...
Hello all!! I am new to this forum. My name is Shamsul Hasan,I live in Karachi Pakistan. I am banker by profession. I am sixty years old. Boating...