How do I check the health of my NMEA 2000 cabling before powering my network?...
G'day Suenos, Interesting link. "The system runs off a high / low voltage system (low is 1.5 – 2.5 volts and high is 2.5 – 3.5 volts). The two...
Solved. I pared the rubber plug carefully off the cable at PB200 end and found the liquid dielectric rubber had voids around the solder...
Surprised that something so basic is so hard to find out... Greetings to all, long time since last visit. Hope all is well with you. NMEA 2000...
G'day Herman, somewhat old thread but; How did that water based epoxy work out? Blind alley, or? Was it any superior to using a suitably...
Silane surfboard glass is transparent, but over 2 layers it starts to lose its clarity slowly. Air is the biggest problem. You need to wetout with...
Thanks guys-Food for thought. I am going to go as drawn, but up the tube to 7.62mm wall & 2205 ss which has twice the UTS of 316L. Monitor closely...
I want to mount my fairlead anchor roller center and kinda like the look of this as opposed a "witches hat" triangle above the channel. I am...
Not unusual for tunnels to wander a bit:D Can't stay in one place for long.;) Nothing off topic about HPR 25, for Op's (me) original delemma....
Hey Tunnels! (And don't ask!) Your right HPR25 is still available. Just spoke to Nick at ATL. Paste 4:1 (by weight) ATL NZ developed it.
That makes me cry inside. We are all part of the problem in one way or another, advertently or inadvertently.
I would take that as a warning shot across the bow. Especially if you want to continue using epoxy. Tyvek overalls taped to your gloves & good...
You need to get a bit more good will in ya mr up church. They happen to be variations on the theme, as in what you might find in a boat yard....