bolt the mold together and do it in one piece.
Short answer. Yes standard gp laminating resin will work with that material. But! That glass will be hard to use in many situations! Wet out...
Shallow V. Haven't measure it but about 12 to 15 degrees... I'll drag the boat out of the shed today and get some pics. Finally got a day off...
Yes Tunnels the hook is right across the hull and yes the boat doesn't respond to trim as well as it should. The boat has new...
the boat originally ran a 4 cylinder inboard connected to a jet! not sure if the hook is deliberate or a manufacture flaw... it now runs a pod...
I should quickly add I have plenty of stitched bi/tri e glass in different weights too, just thought I'd throw out the option of the s-glass to...
I have an old 15ft glass boat I'm doing up (when I say doing up, i mean theres almost zero left of the original boat!) I have just flipped...
Sam Sam I do follow your logic, but experience suggests something may be up! I do run a stainless filler neck in my tank, would a plastic...
I hope you're right gonzo! I have however, cleaned and waxed plenty of moulds before and have received some pretty serious static shocks! I know...
Hi guys, just wondering how you all would earth/ground a glass tank in a glass boat? Can I just run a wire from the filler to a negative on a...
Excellent, thanks guys. Rich.
Hi all first off I apologize if this is in the wrong section or has been asked a thousand times already! I had a quick search but may be using...