Motors only have to be commissioned by a dealer if you want a warranty. Don't buy price, buy Value. You usually get what you pay for in this life,...
Twin mounting Standard MINIMUM spacing used to be 26" but with the bigger 4 strokes they went to 29" as only the 55 Degree V Suzuki's would fit...
FYI...Suzuki outboards use the NMEA 2000 protocol
EasyR...you mean 70hp version. The cams are different but interchangeable. As to your next question..yes you can put a 70 cam in your 60 but if...
The new 2010 Suzuki 60 weighs less than their 40 & 50 !!!! It's great...The old 60 was heavy .
The newest Suzuki 90's weigh the same as Easy Riders' old 60hp. If your boat is rated for 200hp I would go with twin 90's rather than the heavier...
I'm a fan I built a Bruce Roberts 26 (fin keel) in the late 70's and sent off to England for Haslar's & McCleod's (sp?) ' Design your own Junk...
I don't know where your tach came from but it sounds like an inbord/automotive tach. Suzuki's all have a 12 pole alternator so you need a tach...
To go off on a tangent..Steveroo said he couldn't find Yamaha info prior to 1984..that is because Yamaha outboards didn't come to this country...
The model number and serial number for your 8hp "Yamaha" are Evinrude numbers. Take the next to last 2 letters of E8RLCRN i.e. CR and you have a...
White is hot + , black is neg.- , light gray is hot + with key on , green is kill , pink and baby blue are tilt trim, Yellow is tach , dark blue...
You have either a spun prop or if the boat does fine with a light load you have too much pitch in the prop and as it starts to work harder it...
Suzuki re-introduced a high thrust version of their 9.9 this year. They had it years ago with 2-strokes. It's all you really need and comes in 20...
If the motor hasn't been run for a long time then you need to remove and disassemble the carburetors and clean them. I can promise you that it...
Pure wireless ...who knows??? Mercury Verado, yamaha 350 and SUZUKI 300 all have drive by wire in the last two years which will probably trickle...
