Par, Last time I was at Fiberglass Coatings, they had a wole new crew. I didn't see Joel anywhere. They are not the cheapest, but for seven...
Hi, I recently completed a Bruce Roberts Spray 40. It took a long time. I agree with all the others that say to buy a used boat and go from...
Sorry Sharpii, I am new to forums and got confused. I didn't check the date and was responding to the original post of this thread. Oops!
Try Fiberglass Coatings Inc. in St. Petersburg Fl. It is not easy to locate these suppliers. I usually found suppliers that provided bulk...
From the posts that I have read, Par is right on most counts and is right on the proper way to fix this problem; however, not all of us can Break...
I have seen a number of these problems and the only real solution is to do what you do not want to do. I wouldn't try foam due to the fact that it...
I fully agree with apex1. If you look on-line you can find generic epoxies for about $30/gal. (at least when I looked about 3 months ago). There...
Since you don'rt want to go to windward, and I don't blame you. I would agree with you and KISS. I would go with a cutter rig so that you can have...
Aaargh! timed out and I had just written the post. Anyway, I think you are correct and that going in from the side may be your best bet. I suspect...
A lot depends on the fill material for the rudder. If it is light it is probably foam. If it is heavy it is probably plywood. If it is foam, it...
I agree with Par on all counts. Having completed an eleven year project to build a Bruce Roberts Spray 40, as modified by my own preferences, I...