Marine-tex http://www.marinetex.com/PRODUCT%20PAGE_files/All%20MarineTex%20Putty/marinetex%20prod%20info.htm
It is kind of fun sourcing everything you need. I got stuff from Washington, Texas, North Carolina, Maine, Georgia, Montana, Iowa, California and...
Your points are well taken and from reading your post again, I see you are referring to catman021 using poly resin and likely not epoxy and in...
I have to respectfully disagree. Coosa bluewater 26 is structural panel that is used in exactly the same way as plywood. "Thank you for your...
Here is a price list from fishery supply....
I used coosa composites bluewater 26. Pricey but 40% lighter than ply and will never rot.
I used a composite material from Coosa composites. Very expensive, but will never rot.
I also started with a bad floor and ended up replacing the transom, stringers and floor. Really check those stringers because it would be a shame...
When I get to painting my boat I do not want to just mask the rub rail. It is the type of construction where the Cap overlaps the hull and the rub...
Thanks for the reply I am using 45/-45 12oz 6" biax tape. I already decided to tab in another layer but dropping it about 1.5cm down from the...
Just finished bedding, filleting and glassing in my stringers. I have read in a few threads that when using 6" biaxial tape and epoxy I only need...
Good move. The transom needs to be one piece. Takes about the same total amount of work anyway.
You are replacing the whole transom, correct?