baeckmo I put a tender in but missed out on building it. Designed to DNV. Here is a 23m mono with 3 jets I designed and built but had to walk...
If your an amateur your perspective is rather different to that of a professional.( Ad Hoc ) Most professional computations usually err on the...
Tansl, for all those who quote figures Why haven't they come up with the perfect HULL? How many hulls once built have performed exactly to the...
Tansl In rough water the bow is the part that is cutting through the water. Having a boat running on the back part of the hull at speed partially...
Yofish I don't mind been a punching bag. One has to think out side the circle at times otherwise things don't change. There is no air injected...
Ad Hoc There are ways around problems when one designs and builds in aluminium. We did a lot of on the water testing and there where no signs of...
Ad Hoc You mentioned, Plate, there is on plate in the bottom of this hull.
Ad Hoc I gather you have no idea how it was built. It's not built the way you would build a standard aluminium boat and there is not as much...
Kevin Morin Here is the bottom of that aerated hull.
Silver Mark, What are you going to weld (Street - Aluminium ) inside or out side? What's your power supply going to be ? What size welder can you...
The 5.8m fishing boat that I posted earlier, here are two more photos showing you someone the framework and the size ofthe kill tank. There are 4...
Webbey 64 Hi all my designs have been boats that I have built. Style , shape are things that I work on to improve build time and give the...
Yofish I did not have my own press and like you having to get someone to press when and how you wanted it pressed was some times frustrating....
Hi Kevin It's good to see the different styles of boats used around the world and your boat building skills sure do show in your boats.What HP do...
Hi Ad Hoc Yes I agree with the formula on pressing 6mm but with the small amount of 6mm that we have pressed we managed with the 12mm radius....