Fourm Thanks guys, the info helps. MichaelG
The bottom is 48" wide and the top sides are 70" wide. (sorry)... The reason for the 1/4" ply and 3 layers of fiberglass is... I believed that for...
I'm designing a boat 4'wide by 16' long and a 70" beam 24" sides 1/4" plywood covered with 3 layers of 7.5 oz. fiberglass. The transom will be 1...
I'm listening, thanks for the advice MichaelG
How large for the first batch of epoxy resin (U.S. Composites) with medium hardner going on 7.5 oz. e-glass cloth on a 16' x 4' x 1/4" lauan boat...
How large for the first batch of U.S. Composites epoxy resin with medium hardner going on 7.5 oz. e-glass cloth on a 16' x 4' x 1/4" lauan boat...
Another facter in orange peel is having the gun to close to the project. High or low air pressure will be compensated by having the spray gun to...
Air pressure is a consideration. I have never sprayed what your spraying but have sprayed the top coat clears in automotive. The number one reason...
Thanks BWD I had second thoughts about that 1/4" also. I believe my problem partly is I purchased a inexpensive Jon boat plan and I trying to...
The cloth glass will do alittle of both, but more to protect the wood and waterproof. Thanks Moosemiester MichaelG
The design will resemble a 16' Jon boat 4' wide 24" deep with a 2inch sub floor. I will use the boat on rivers and small lakes. I'm going to...
I'm building my first boat and need to know how many layers fiberglass cloth to use on the bottom. I'm using 6 oz. e-glass, 60" wide? The boat...