Did a google, this guy posted in 2012 on a british sailing forum, seem to be happy with his Sparlight. He may be able to help you out....
I would put it on the top near the front of the tank. Perhaps you can get some cross flow of air between the two vents which will help. The...
more info finally got around to looking at the motor. It is a mid '90's Saltwater Series 175. motor runs in both directions. I could not find...
what is a Stabilizer sail used for? Not sure what you are asking.
Your question is hard to understand. I think you are referring to a vacuum source. The carburetor may be used on different engines. If your...
A friend has asked me to troubleshoot why his trim motor doesn't work. If memory serves it is an ocean series 225. My initial guess would be...
Thanks. The drain goes all the way through, I can see the boat parked next to it. It probably is a cockpit drain, but seems way too big. Here...
I was wandering around the yard waiting for my bottom paint to dry the other day and I stumbled across this approx 40' full keel sail boat. Hull...
Pacific Seacraft is now located in Washington, NC
re overheat You said the impellers are new and the HX cleaned. Make sure you check the lines and fittings between the pump and the HX. If the...
if you haven't yet, I'd check with IP. Many of the current crop of boat builders are very customer oriented and will try to answer your...
I've seen a couple delta wing designs on outboards. One mounts to the cavitation plate the other to the skeg below the prop. The upper one is...
On my nissan there is a rubber plug about half way down the leg. Pull the plug off for access to the shift linkage clamp.