Sounds like your trying to market your company more then anything else. Obviously there is similarities, epoxy is epoxy but there is a reason boat...
The kind of epoxy you are talking about, garage floor epoxy is very different than a marine grade epoxy. There is no marine grade epoxy (west...
Quick answer, the bonding strength of most epoxies is around 2000 psi. Polyester is usually around 500 psi. A secondary epoxy bond is also just as...
6 and 12 oz cloth is not enough to strengthen a transom. You need to use 1708 biaxial. 6oz cloth is pretty much cosmetic. Depending On where you...
Using anything but 1700 or 1708 is a waste of time and material. Csm is only good for cosmetic repairs or hse inbetween layers of 2 or more 1708...
Yeah your best bet would be epoxy thickened with silica and high density filler or just silica. Gonna need alot but its the best way to do it....
I wouldnt use 6-8 oz cloth for any type of structural repair such as the stringers or the transom. Alternate csm mat with 1708 biaxial cloth 3-5...
Just buy the cheap full size primer gun from harbor freight (1.8 mm tip). Youll have 8-10 mins of working time to spray and clean the gun with...
Thin with duratec or styrene and spray it with a cheap gun. Mix up a littke and soray it on your work area. Dump excess and clean gun reak quick....
When it comes to strength of epoxies it all comes down to raw materials used to make the epoxy. Buy a good name brand and it will never fail you....
Whats your email address or phone number?
I know you read alot that gelcoat wont adhere to epoxy but its just not true. I spray gelcoat over epoxy on almost a daily basis and its...
You have to fair the area with a fairing compound. Best bet for a area that size is a epoxy fairing compound. Gives you way more working time then...
