Pulled the selector valve last night but it all looked okay. I will pull the trans. back off tonight and tear it back down. I will let you know...
This is the first time I have ever tried to rebuild a transmission. I will pull the selector valve and check it first
I think I have the pump in correctly or I do not think I would be getting any pressure at all.
I just checked the pump pressure at the 3/8" plug near the shift lever. I get about 135 psi in all three gear selector positions. It will only...
Reverse seemed pretty strong when I backed it off the trailer. After about a twenty minute test ride, the trans was slipping bad in forward and...
Sounds like I may have screwed up the setting of the clutches. I used all of the ones that came with the kit. I thought that there where the same...
I am not sure what you mean by setting the clutches. They would only go in one way. I have not checked the pressures yet. I will do that in the...
I have a 1998 Tige inboard with a velvet drive 10-17 trans. I rebuilt it using a kit I got from Skidim with new seals clutches, etc. When I first...