That looks like more of a vacuum accumulator. The vacuum gage would not be happy with resin in it. The traps my co-workers use have the hoses go...
If it were me I'd definitely use fiberglass instead of just relying on the glue. You should read this, informal, test comparing laminating resin...
I've used Gel Magic for gluing in G-10 epoxy tube sections. The tubes are my method of "hard spotting" through holes on my deck and hull. The...
My boat was built using dyed resin/hardener that is green in color. My guess is blue and yellow dyes mixed from resin and hardener. The hull was...
I've heard good things about using Kilz primer as a tie coat. They make an oil based version. For my interior, I'm testing using an epoxy...
I have some questions regarding application of the paint. I can heat my shop and its nice and dry inside, but to spray I need to open the garage...
I think there may be a problem with the way the coupon code was set up. When I put a gallon of Quantum in the cart and apply the code it errors...
Joel, I'm ready to buy paint for my project. Do you have a coupon code you can share with me? Post or PM if you do! Thanks!
I'm going to be painting my trimaran this spring. I'm still deciding on paint. I have an automotive hobbyist grade HVLP system and an air...
People seem to like the MAS epoxy quite a bit. I've been working with Applied Poleramic epoxy for many years and have been happy with it.
SukiSolo, I believe you are correct about the white 545 fading to tan. I found an old picture of the hulls in the factory and they are white. My...
The color was tan directly from the factory from what I know. The boats were sold as kits and were shipped with only primer, but I believe this...
An Awlgrip rep thinks its the High Build primer. I'm not sure about filling pin holes with High Build primer. I guess I'll end up doing some...
I have a sailboat built using epoxy resin and the builder stated instead of gel coat they used Awlgrip 545 primer since the boat was oven curved....
