http://www.fredwahlmarine.com/Under%20Construction.html Is this boat undergoing a sponson refit?
Search for "carolina hulls". They are built on plywood jigs with battens that run fore and aft. Plywood strips are glued diagonally.
I read this thread pretty quickly so if mentioned disregard. If the gears are velvet drives the 1.9 to 1 gear reverses in the gearbox. They are...
who designed and built the boat on the far right of your home page? One of the best looking hulls that I have seen-really nice work
new project To answer your question, the boat should run fine, I would guess close to 30 mph with 454's if you keep it light. I don't have much...
I don't really understand what you mean by unfolding. if you want to make the hull stronger you can grind/sandblast the interior of the hull...
velvet drive I thought of something else. Inside the clutch pack is a metal disc that is shaped like a clutch diaphram. It unloads the plates...
borg - warner The selector valve has rings similar to piston rings but they seldom give problems. The clutch plates are sticking causing the...
jack - shaft I knew exactly what you were talking about. I have a 23' Seacraft that was originally set up with a volvo i/o and a 4 cyl diesel...
azipods It's called an azipod. Never seen one on a small boat although you may could convert something like a bowthruster, it has a similar...
boat building facility You may want to checkout the Professional Boatbuilder site at proboat.com, I haven,t used their online mag but if they...
Before you buy the 1.5 Paragon v-drive you need to make sure you can get the bigger prop under the boat unless you're planning on changing the...
