Yes I did answer my own questions. 1) Deck line is sheer line 2) Contour line is the keel line height(z) at x=0 and y=0. 3) never determined what...
Got it thanks Steve. Changing the draft brought the displacement in line.
Water line and displacement are way too high. Not sure how to control that?
Another iteration using the lapstrakes as chines Still need to clean this up. But shows a much different picture.... Updated the line drawing...
There are only three strakes, so my next model will use the lapstrake lines as you suggested.
No specific plans for the model. Just trying to document my one (maybe more) off hull.
David, Yes, for a couple reasons. 1. It is a Lapstrake fiberglass hull. So depending on where the points are measured, it can look bumpy in the...
Importing Chines worked Here is the line plans of my boat that I measured. I used the chine import to import the waterlines. Any comments?...
I am new to Delftship and I plan to be taking off lines from my 23' skiff and want to make all the correct measurements for a txt file that I can...
Just remember, it takes mullet to make mullet
I am not expert, but a 27' panga and 3,000 lb payload should be no problem. My 23' would easily handle 2,000lb. If he is going to have a huge...
Tippy Panga? The panga pictured is actually from a Trinidad design and they call it a Pirogue. IE canoe. So Yes Panga's are tender and will...
Fun boat Gary, This is a fun boat, I have used it for all sorts of things from hauling trash off beaches during beach clean ups, to moving...
I agree, nothing is really going to pump lots of water quickly but with the open bilge design that is not really a requirement. With bilge pumps,...
