i was under the impression if i make the boat out of epoxy, i cant gelcoat the inside.
Great job man! i love it!! looks like your ready to cut the boat in two and epoxy it in. use 2x4 to keep the two boat pieces lined up,well it will...
oh great! thanks for that. i know it needs to be apox 1/8th thick and weigh about 70 lbs to be strong enough.latest news is i shopped around and...
i just found a great deal on epoxy, so can i use two layers of 1808 biaxial and run overlaps down the keel, so the keel and transom would be four...
also, can you post a close up of one of the worn areas? as close as you can get your camera to focus. its hard to tell how this was made.resurch...
hello Luix, im going to give you a good semi educated guess at two layers of 1.5oz csm and a 24 oz roving. id use a 20 oz cloth, but roving will...
do you guys think that 1.5 mat and 18 oz roving or cloth, followed by another 1.5 mat,run overlaps down the skeg might do it? two or three gallons...
p.s. Both the Rhodes 32 Chesapeake and Traveler are about as serious a ship as you can own, esp the traveler. it weighs in at almost 15000 lbs,...
ive almost bough one of these before. its short LWL is due to the classic lines,or long stern overhang. the atomic four gas engine has a bad rap,...
I was thinking the same thing the last couple of days. it does have that 24 oz+ tape all the way down the skeg though. that might even be heavier,...
just wondering whats avalible for linux, i dont have a windows computer avalible.
[IMG] [IMG] not my layup, just the hull that was in the mold.
Yes, i agree on the no chopper gun, ever.im going to pop one row boat out b4 i add the dagger board trunk. im ready to lay one out just as soon as...
I just aquired the mold for a 8' rowing dinghy, and i dont have much experience laying up glass. what would you guess the layup scedule might be...
