Yeah I used the grinder with a 80grit sanding pad on it to clean the edges of the cracks and a cutting disk to remove any weak glass ore cracked...
So been so busy with work lately ain’t had time to come on here but I’ve got a lot of work done to the boat now and it’s nearly finished new deck...
Ok thanks for the help and polyester resin I will post pictures next time I get down there of my progress but i don’t get much Time with work atm
This repair is much more extensive than anything I have previously encountered but I don’t have the money to get it fixed professional so my only...
Ok great thanks for your reply I will order some 1708 also would wax paper ore realese wax and cardboard be sufficient to place under the boat...
Also the boat is still connected 5 feet at the front and 2 feet at the back with no cracks the hull is still verry solid
The shape of the missing keel Is not very complex I don’t have acsess to a vacuum pump I will measure the thickness when I’m Down there next my...
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] So I cut out the pice of wood today that the previous persons had place and fiberglassed in to fix...
Will upload photos next time I can get down to the boat and I have fiberglassed things more times than I can remember but just basic things like...
Thanks for your reply i did suspect that I would have to remove the wood its going to be a pain to do but I suppose there’s no point doing it...
So I brought this dory a few months ago and 2 weeks later it sunk on its mooring so got it lifted out the water and started working on it found...