Thanks a lot Ike for your help¡
Dear Guys, For a long time I been working in the construction of my first boat using stich and glue technique. the pieces were cutted,...
Rake the mast Hi Lewis, Thanks very much, in fact, the boat will have a skeg, i will consider it in order to get the CLR , plus 50% of the...
Skyak, Thanks very much for your help. I'm taking in count your advices. Sadly, there is nobody with experiencie in Lug sails near to me,...
Sorry Skyak, Boat's Beam is 1.3mts Could you please recomend me a method to calculated the sail area? Thanks Carlos
Dear Guys, I'm working in the construction of a 3.4mts flattie. Solved the main part of the wood working, I put the focus in the sail design....
Closed ¡ Dear Guys, Finally I have fixed the mess¡ Probably last comments, about were a better solution; just put a buttjoint inside...
some pics Dear Guys, Here are some pics... 1 to 6.. So, any suggestion is welcomed. Best regards, Carlos
Thanks a lot guys!
Dear West. Thanks a lot for your help and you are right..is my first boat I´ve read and think a lot about this project..... and then, after...
Dear Guys, Thanks so much for your help. In fact, the boat is very similar to the lewis´ pics. Sadly I messed up one of the sides panel. I...
Uncivil, FInally i decided to use plywood. Based in some advices from the forum, I realized ... Plywood is cheaper. Probably my next...
Dear Guys, I'm building a simple flattie. I have no experience building boats and also i have no experience with the stitch and glue technique....