Thanks guys I cut the old ignition off and left a inch or so of the old wires on it. Put everything back the way it was. But I cant read the small...
I could use some help my manual is MIA. I put in a new ignition switch and its a little different. moved some things around, I had only choke no...
U.S. paint, the guys who also make awlgrip put out a system called awlfair. Its a two part epoxy which basically consist of what your mixing. It...
I have already painted with alwgrip, removed all plastic badges and smoothed everything out. I was told that the oceanrunner cowlings would bolt...
Has anyone ever switched the old stock cowling for a newer year model on a evinrude johnson 225 hp. Ive seen it done on mercury outboards. I have...
Mac have you started anything with the beastie? I have never seen this "soaked foam". Even the 77 bertram moppie we are rebuilding now, the foam...
Mac they have "chambers" inbetween stringers, that are solid foam. There are no limber holes for water to escape. Water was never supposed to go...
Mac, the transom would be the place to start in my opinion. Not shure where you are in FL anywhere near palm beach and I would be interested in...
if you use plane old gelcoat make a color you will never sray in a part. Gets a little confusing.
get the boat on plane and try each motor seperatly. My 30' midnight express also has 2 right hand motors. Same problem around 55 mph.When I...
Looks like the "white stuff" could be fairing (bondo). I just fixed a similar deal fri. Take a aggressive grit sandpaper to it, or even a grinder....