I have always been told when you wrap the corners with a small gauge material the heat effected area on both sides will crack directly above where...
Are you telling me this CAD designed and CNC cut frames aren’t up to par? Gotta get a new engineering firm Hahaha. So I need to wrap my corners on...
I keep saying bulk head but I believe everyone is calling them frames. The whole reasoning for this post was whether or not to weld my...
The Welds aren’t bad, it was just Uhhh bad welding wire…. Argon was bad….. new welding machine….. glove had a hole in it…. Lens was dirty…. Give...
I could go on with pics all day
Built over 100 flats. Have only come back for adding stuff on. One boat got rear ended and before the motor broke from the tree it tore about a...
Thats kind of where I am at with it. I was just debating whether I wanted to weld the longitudinal stringers to the bulkheads. I primarily build...
so basically it ends up stressing all 3 adjoining pieces rather than just one? Another possibly dumb question, would it technically be better to...
what exactly do you mean mouse holes are where are they needed?
I cut t bar to make gussets for what your talking about up against the main bulkheads like the ones you are referring to. I haven’t tacked them in...
Ok cool man, I appreciate it. I’m going to go through and read all that. With the obvious instantly noticed flaws aside, would you join the...
I’m all about improvement and growing my knowledge. By no means will constructive criticism bother me, whether it’s from a 5 year old or a 50 year...
It’s 24 feet long and 84 inch bottom. 3/16 will be laid on top and welded below deck to the frame. The floor will have cut out strips spaced out...
The cut outs for the floor will be rounded. What should I do different in the corners where the bottom meets the sidewall And the gussets? The 3rd...
It’s my design. I have my own business. I’m curious about the longitudinal stringers to my bulkheads. It’s a 24/84 with a 3’ beak.
