I assume you're talking about making a scarf cut across the width of a 4/8 sheet to make more surface area for an epoxy bond? If so, yes, you...
Can this be used without vacuum bagging or is that unheard of? How can plywood be attached to the M80 19mm, for example, if the M80 is in the...
I'm using a 36 oz triaxial for a hard dodger I'm building and it is easy to work with an incredibly strong. It is great for layup and the...
I have purchased a large lot of structural foam board and will have surplus beyond my project needs. The M80 is only available in 6mm or 19mm....
Wow! Thank you, thank you. :D I had heard about this boat but hadn't been able to find this article. I will link to it in the blog I've started...
Thanks for the input. While I knew that this hull would be much more suitable for the intended use than the one in the other posting, I...
Gentlemen: I think you have me convinced that this is not a good idea. The amount of expertise and cooperation on this group is awesome and...
Intersting thoughts, but I don't quite understand. If I remove 1,000 lbs within 3 feet forward of the stern and go back with 100 lbs at the...
I am looking at the possibility of rescuing a derelict Cal 25 and making a river cruising boat powered only with a 6-9.9hp outboard. I don't...
I am looking at buying a 21-24' hull with large cockpit and cuddy, removing IO and patching transom and repowering with a 4-stroke 9.9HP. No,...
I just brought back a 1989 IMP 220 Sportsman that has been out of the water for 7+ years and am in the process of cleaning, fixing and (hopefully)...