After all, I figured I'd lay down the carpeting anyway... I'll try to keep an eye on moisture for what it's worth. Carpet hides defects and lack...
then what should be put down on the sole other than bed liner?
even the plastic carpets? There is absolutely no fabric in that carpet, it's all plastic and rubber.
Small update... Sole ready for carpet. I'll find something to fill the gaps on the side of the sole and make it even all around. [IMG] I...
No pics, but the floor is in. The rear end got its first coat of epoxy and I'll top it off tonight with a second coat or thickened epoxy.
The cross members are now fully epoxied! And I just baught an engine crane so I don't have to break my back trying to put the motor back on :p I...
As I was doing the epoxy on the crossmembers... I ran out!!! 7 days and counting... And I dumped a bolt and a t-nut in a mix of...
I don't know if there is an electrical difference between marine and automotive players, but I know in automotive players you need 2 power source...
Anti-seize? Really? I was actually thinking blue lock-tight for some reason... Lock-tight would make a semi water proof thread, and yet still...
Of course, cause that's the dummy way of turboing an engine. If someone wants to push anything higher than 7 or 8 psi(general rule of thumb)...
*See attachement for better understanding* On the picture, the brownish parts represent the stringers and crossmembers; the light grey represents...
wire wheel attached to your preferred angle grinder will work wonders. Just make sure you're careful or you'll go through the hull in no time.
There ya go... Right now, instead of 4 I got 3 bolts attaching the swivel to the seat. I'm using the empty for the spring loaded bolt. I may...
To attach the seat to the pedestral I'll be using one of these: [img] Those don't have a locking mechanism and the one that do, don't look...
It's galvanized steel that will be coated with automotive "anti-rust", the green stuff, then painted over flat black or something. But yeah, I do...