Hi Mike Yes there was flotation foam. Here some pictures of it it was saturated with water as you can see in one of the pics. I don't live...
Foam Core Plywood 3mm Okoume faces. Polyurethane foam core. Light weight....
Thank you mike I say one on each sheet because that is what is there now. So i just thought it would be best. and the out side skin is like 3/16...
Thats what i thought the biggest span will be about 4ft by 20 inches over the fuel tank . the only spot with out good support.
Update Well here is up date and some pic so you can see my project. I found the transom had some rot so I am going to replace it with new...
Can I use this product for my sole if I use 1/2 inch or should i use 3/4 it is foam filled with okoume top layers. This only weighs 23#for 1/2in...
Thats the reason I ask the question see I bought it from another place and then found A cheaper place to buy it. Just did not know if if one brand...
I have a question. If i use one brand of epoxy can I use another brand long as I am going over cured epoxy. I found a better supplier.
Hello I am in the process's of rebuilding a 1973 Cruisers built Tri hull center console. My boat had a bad core in the hull I have taken out...
Thank you Dan. You are exactly right. first i will have the pride and accomplishment of rebuilding it myself and go though a a learning spell of...
Update I have removed all the core material and the encapsulating glass. I have sand the entire hull. I am getting ready to repair the holes in...
Thank you Mike. I have the placement of the original stringers marked. I was going to put the stringers in the original spot with 1/4 inch foam...
Let me ask a question Mike. On a full fiberglass hull how thick is the the glass. I would like to make this just a fiberglass hull and eggcrated...
