HI Hoytedow, i think the same also but i think i will add revinex to the acrylic paint as to make it stronger. They sell the revinex as additive...
Hi Guys, garydierking helped me with information on the mast so now i will build it. Also i searched around and found some paints: i found two...
Hi Hoytedow, i will give a shot to see if i can purchase a cheap router. otherwise will use the tube of my friend and see if it is workable "will...
Hi PAR, it is 60mm by 3mm and its tube not welded. i don't know the mark. to make a birds-mouth mast i need to by a router and make a table for...
Hi Hoytedow, I was talking to a friend of mine after work and he has another aluminum tube like mine "construction type but unknown mark" that is...
Wa`apa data as per the book overall 23’8”(7200mm) Hull width 211⁄4”(540mm) Overall width 11’(3370mm) Draft 6”(150mm) @ 675 lb (306 kg)...
photos attached photos of station 2 attached
Hi guys, thanks for the help. hoytedow if i put the fiberglass on it can i use many butt joins for the mast. i was thinking a little more after...
Guys i have found this page: http://www.themultihull.net/st2.htm its says one can build a fiberglass mast with polyester resin. does it sound...
Hi hoytedow, thanks for the help. What might be the dimensions for a 6 Meter Mast and 4.5 Meter boom. that will be much cheaper. BR Aliaj00
HI all, i didn't expect so much support for my question. :) thanks a lot i learned almost everything from this forum. and yes this is going to...
Hi TeddyDiver, Thanks for the tip, i will give it a shot also i am going to put a tacking rig on it and will be a lot cheaper than the 450g/sqm....
Hi TeddyDiver, thanks for your help. i am finishing the building of a WA`APA 24' outrigger and it took almost a year. Now i am searching for...
Hi all, what materials can be used for a sail in a outrigger canoe? I have found 100% polyester cloth that is 450 gram/meter-sq for about...
