Tomsboatshed

Time to repeat.

The usual method is to design a transition from a lap joint to a miter joint, and then work on vanishing the chine with the miter joint...

The "is CSM needed" question is a bit tricky to answer. The actual bond is the same with or without the CSM, but it can become critical...

It seems to me the use of the csm is not at all for thickness, but dealing with uneven bonding that can occur laying on layers of axial...

Thanks for the explanation. It is proof that there are options for safer reactors though. Also, that smaller units can be built...

Canadian nuclear reactors used for power generation are CANDU reactors, typically of 500-900 MW per unit. CANDU reactors do not use...

I was able to find a match! I contacted a guy from YouTube who replaced the rub rail on his ELI dinghy. He told me that he got the rub...

25' Edwardian Gentleman's Launch.

Alu trawler yacht design from AMD team (Thailand)

I've been meaning to post some video of the boat running out on the bay. So, here is a recent sample. . .

27'-6" LOA, river or lake runabout, probably electric powered.

On the other hand it must be remembered that it is not just the sheer line, but also the camber of the deck. While many sheer lines...

Thanks! It has been annoying me for years, but I've really tried hard to get it right. Until now. Getting much closer. :)