Michael Fitz 25’ mold?

Discussion in 'Boat Design' started by Brett Shumate, Mar 9, 2023.

  1. Brett Shumate
    Joined: Mar 2023
    Posts: 5
    Likes: 1, Points: 3
    Location: Panama City

    Brett Shumate Junior Member

    Cusious if anybody has seen or owns the Fitz / lightning 25’ molds; if so, I am interested in purchasing that mold, or would allow me to drop my fitz into mold to redo stringer system

    thanks Brett
     
  2. bajansailor
    Joined: Oct 2007
    Posts: 3,596
    Likes: 1,560, Points: 113, Legacy Rep: 37
    Location: Barbados

    bajansailor Marine Surveyor

    Welcome to the Forum Brett.

    Do you want to use the mould simply to hold the shape of the hull while you cut out the existing (knackered?) stringer system?
    It might be easier to simply support the hull very well along it's length on the outside?
    Or is it already twisted / out of shape (re the knackered stringers), and you are hoping that by dropping it into the mould then that will re-align everything?
     
    BlueBell likes this.
  3. BlueBell
    Joined: May 2017
    Posts: 2,684
    Likes: 959, Points: 113
    Location: Victoria BC Canada

    BlueBell . . . _ _ _ . . . _ _ _

    Yes indeed Brett, welcome to the Forum.

    I guess it's not difficult to get things shipped to Panama City!
    Location, location, location.

    Are you going into production or just a realignment?
     
  4. Brett Shumate
    Joined: Mar 2023
    Posts: 5
    Likes: 1, Points: 3
    Location: Panama City

    Brett Shumate Junior Member

    Stringers are still holding fine but are rotten in areas, would just like to keep it flat no hooks and holes
     
  5. Brett Shumate
    Joined: Mar 2023
    Posts: 5
    Likes: 1, Points: 3
    Location: Panama City

    Brett Shumate Junior Member

    Realignment, for now but iff I had mold i might make a few sleds quite a few people around here like my boat
     
  6. Brett Shumate
    Joined: Mar 2023
    Posts: 5
    Likes: 1, Points: 3
    Location: Panama City

    Brett Shumate Junior Member

    Juat figured it might be easier to drop into mold and redo stringers system
     
  7. Brett Shumate
    Joined: Mar 2023
    Posts: 5
    Likes: 1, Points: 3
    Location: Panama City

    Brett Shumate Junior Member

    Do you have the molds??
     
    BlueBell likes this.
  8. bajansailor
    Joined: Oct 2007
    Posts: 3,596
    Likes: 1,560, Points: 113, Legacy Rep: 37
    Location: Barbados

    bajansailor Marine Surveyor

    Brett Shumate and BlueBell like this.

  9. BlueBell
    Joined: May 2017
    Posts: 2,684
    Likes: 959, Points: 113
    Location: Victoria BC Canada

    BlueBell . . . _ _ _ . . . _ _ _

    How do you know I don't have the moulds?
    No, I don't have the moulds or the molds, neither.
     
Loading...
Similar Threads
  1. brokensheer
    Replies:
    0
    Views:
    1,464
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.