acoustic & thermal hull insulation

Discussion in 'Materials' started by KarlH, Oct 19, 2017.

  1. KarlH
    Joined: Aug 2017
    Posts: 27
    Likes: 3, Points: 3
    Location: Minnesota

    KarlH Junior Member

    I'm curious what materials and sup[pliers other people here have worked with... Any favorites?
     
  2. Barry
    Joined: Mar 2002
    Posts: 1,851
    Likes: 505, Points: 113, Legacy Rep: 158

    Barry Senior Member

    Need a little more information
    Is the boat aluminum or fibreglass
    Are you trying to deal with an engine inboard for noise suppression, this is a different situation
    Are you trying to insulate the hull at the waterline
     
  3. KarlH
    Joined: Aug 2017
    Posts: 27
    Likes: 3, Points: 3
    Location: Minnesota

    KarlH Junior Member

    It's a production fiberglass hull with foam-cored stringers and a marine ply bulkhead and ribbing. Access is good. The plan is to insulate as much of the hull as possible because it might be used as a livveaboard on a cradle in the winter.

    Engine noise is something I haven't thought much about yet, but definitely should.
     
  4. PAR
    Joined: Nov 2003
    Posts: 19,126
    Likes: 498, Points: 93, Legacy Rep: 3967
    Location: Eustis, FL

    PAR Yacht Designer/Builder

    Look up Lizard Skin products and use both, the thermal and acoustic spray on insulations, for best protection.
     
  5. KarlH
    Joined: Aug 2017
    Posts: 27
    Likes: 3, Points: 3
    Location: Minnesota

    KarlH Junior Member

    Thanks PAR, that's exactly what I needed :)
     
  6. Yellowjacket
    Joined: May 2009
    Posts: 664
    Likes: 113, Points: 43, Legacy Rep: 447
    Location: Landlocked...

    Yellowjacket Senior Member

    I wasn't aware of the Lizard Skin products and that seems to be good stuff, but if you're trying to insulate a hull and live inside it, you're going to need a good bit more insulation to keep the temperatures comfortable. Twenty mills of insulation, even if it's pretty good stuff isn't going to do much to make a boat livable when it fairly cold outside. I'd be looking for a material that is fireproof foam for obvious reasons and has a thickness of half to 3/4 of an inch. That would substantially reduce the heat loss and keep you a lot more comfortable when the water is cool. I like Airex, but it's pretty expensive. The thing about it is that it can be heated with heater or heat box and formed to shape, then after it is shaped you can glue it down and you have an effective insulation.. If you don't keep the hull insulated, you're going to get condensation inside and it will make a mess of things. Given that you're in Minnesota you're going to need some pretty good insulation or you're going to need a lot of heat..
     
  7. TANSL
    Joined: Sep 2011
    Posts: 7,369
    Likes: 699, Points: 123, Legacy Rep: 300
    Location: Spain

    TANSL Senior Member

    There are several companies with extensive experience in ships and marine installations. Surely you will also need passive fire protection. Take a look at the attached file, as an example of the many you can find on the internet.
     

    Attached Files:

  8. KarlH
    Joined: Aug 2017
    Posts: 27
    Likes: 3, Points: 3
    Location: Minnesota

    KarlH Junior Member

    I'm familiar with Airex as a maker of structural foam, but I see now that they make other stuff. Is that what you're referring to?

    Before I posted on here I was planning to experiment with heat-forming polystyrene foam panels. As long as it doesn't collapse the cells, I was thinking it would probably be OK.
     

  9. hein
    Joined: Oct 2016
    Posts: 1
    Likes: 0, Points: 1, Legacy Rep: 10
    Location: PacNW

    hein New Member

    3M Thinsulate(TM) SM600L or SM400L is great acoustic/thermal insulation that is also hydrophobic.
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.