Gitana 17-100' Trimaran Foiler-Launch 7/17/17

Discussion in 'Multihulls' started by Doug Lord, Jul 13, 2017.

  1. Doug Lord
    Joined: May 2009
    Posts: 16,679
    Likes: 349, Points: 93, Legacy Rep: 1362
    Location: Cocoa, Florida

    Doug Lord Flight Ready

    This spectacular boat will be launched in four days........More here: Gitana : Offshore racing stable createdBaron Benjamin de Rothschild http://www.gitana-team.com/en/
    Design by Guillaume Verdier and Team with the Gitana Design Office.

    THE MAXI EDMOND DE ROTHSCHILD SPECS

    Start of construction: October 2015
    Launch: 17 July 2017
    + 170,000 man-hours, including 35,000 hours of studies
    + /- 40 people on average over the 20-month build

    LOA: 32 metres (105')
    Beam: 23 metres ( 75')
    Weight (displacement): 15.5 tonnes
    Air draught: 37 metres (121')
    Downwind sail area: 650m2 (6993 sq.ft.)
    Upwind sail area: 450m2 (4841 sq.ft.)
    Appendages / Number: 6 - Type: T-foil float rudders (2), L-shaped foils (2), daggerboard on the central hull (1), T-foil rudder on the central hull (1)

    Naval architects: Team Verdier in collaboration with the Gitana design office
    Constructors: C3 Technologies (bulkheads and appendages), Re Fraschini (foils), Lorima (mast), Multiplast (platform), Persico (cuddy)
     
  2. wet feet
    Joined: Nov 2004
    Posts: 1,397
    Likes: 435, Points: 83, Legacy Rep: 124
    Location: East Anglia,England

    wet feet Senior Member

    Thanks for the news.I will be looking out for the launching and any news of the boat's performance.
     
  3. Doug Lord
    Joined: May 2009
    Posts: 16,679
    Likes: 349, Points: 93, Legacy Rep: 1362
    Location: Cocoa, Florida

    Doug Lord Flight Ready

    You're welcome-lots more to come.........
     
  4. Doug Lord
    Joined: May 2009
    Posts: 16,679
    Likes: 349, Points: 93, Legacy Rep: 1362
    Location: Cocoa, Florida

    Doug Lord Flight Ready

    Well, the boat was launched-but NO FOILS!! I was looking forward to this -very disappointing......Gitana 17 is going from where it was launched to Lorient , presumably , for outfitting and rigging.
     
    Cholsson likes this.
  5. Doug Lord
    Joined: May 2009
    Posts: 16,679
    Likes: 349, Points: 93, Legacy Rep: 1362
    Location: Cocoa, Florida

    Doug Lord Flight Ready

    No pictures yet but I found this little nugget recently added which confirms the daggerboard will use a lifting foil similar to Maserati:
    GuillaumeVerdier, naval architect
    “The initial idea was to design the first oceanic boat capable of flying with unfailing reliability. There are trim tabs on all the appendages. The central daggerboard has one too, a lifting surface in the form of a skate wing in order to increase stability still further when heeling and rolling. That is a huge amount for Sébastien (Josse) to trim. He's going to have to go at it in stages, learn how far is reasonable enough and also what hand to play when the seas are too heavy. There were 80 of us within Team New Zealand answering these questions. As such, we'll need to be patient and discuss ideas in depth to reveal the boat's true potential.”
     
  6. Doug Lord
    Joined: May 2009
    Posts: 16,679
    Likes: 349, Points: 93, Legacy Rep: 1362
    Location: Cocoa, Florida

    Doug Lord Flight Ready

    And for those that never read the "Planing Trimaran" thread-or who did and weren't convinced:
    Flat-bottomed hull and floats: As is the case on the America's Cup craft, the Maxi Edmond de Rothschild is equipped with three planing hulls with inverted bows and flat bottoms, so as to increase the ability to fly and provide excellent stability in heavy seas. The central hull and floats have a high freeboard for improved protection at sea.
     
  7. Corley
    Joined: Oct 2009
    Posts: 3,781
    Likes: 196, Points: 63, Legacy Rep: 826
    Location: Melbourne, Australia

    Corley epoxy coated

  8. semelis
    Joined: Feb 2015
    Posts: 48
    Likes: 3, Points: 8, Legacy Rep: 18
    Location: Barcelona

    semelis Junior Member

    The text says it explicitly:
    "une dérive courte avec un plan porteur, "
    Seems that the moth way gains adepts.
     
  9. Doug Lord
    Joined: May 2009
    Posts: 16,679
    Likes: 349, Points: 93, Legacy Rep: 1362
    Location: Cocoa, Florida

    Doug Lord Flight Ready

    =================
    Thanks ,Corley-I wouldn't have thought to look there..... Big difference between this and Maserati since this boat was designed from scratch to use the daggerboard foil-going to be an incredible boat!

    picture by Yvan Zedda


    Gitana 17-daggerboard foil.jpg
     
    Last edited: Jul 23, 2017
  10. Doug Lord
    Joined: May 2009
    Posts: 16,679
    Likes: 349, Points: 93, Legacy Rep: 1362
    Location: Cocoa, Florida

    Doug Lord Flight Ready

  11. Corley
    Joined: Oct 2009
    Posts: 3,781
    Likes: 196, Points: 63, Legacy Rep: 826
    Location: Melbourne, Australia

    Corley epoxy coated

  12. Doug Lord
    Joined: May 2009
    Posts: 16,679
    Likes: 349, Points: 93, Legacy Rep: 1362
    Location: Cocoa, Florida

    Doug Lord Flight Ready

    Thanks Corley! He mentions the discovery of a "self-stabilizing foil" in 2010 or 2011 when he was at TNZ and says that this boat will use that type of ama foil-like an AC 72! Mentions that it is a large foil-larger than any other boat. I'm still looking for pictures but none of the ama foil so far.....
    UPDATE: A really fantastic interview-just watched for the second time and there is a lot of detail.

    Yachting World https://www.facebook.com/yachtingworldmagazine/videos/vb.111913865558561/1425355727547695/?type=2&theater
     
    Last edited: Jul 20, 2017
  13. Doug Lord
    Joined: May 2009
    Posts: 16,679
    Likes: 349, Points: 93, Legacy Rep: 1362
    Location: Cocoa, Florida

    Doug Lord Flight Ready

    Oh, brother....I can't find any pictures of the ama foils.They must be late-and/or the Team wants to sail without them first?
     
  14. Doug Lord
    Joined: May 2009
    Posts: 16,679
    Likes: 349, Points: 93, Legacy Rep: 1362
    Location: Cocoa, Florida

    Doug Lord Flight Ready

    Gitana 17: le mast--


    But, but where are the ama foils??
     

  15. Corley
    Joined: Oct 2009
    Posts: 3,781
    Likes: 196, Points: 63, Legacy Rep: 826
    Location: Melbourne, Australia

    Corley epoxy coated

Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.