Skiff

Discussion in 'Wooden Boat Building and Restoration' started by hoytedow, Sep 18, 2014.

  1. Pericles
    Joined: Sep 2006
    Posts: 2,015
    Likes: 141, Points: 63, Legacy Rep: 1307
    Location: Heights of High Wycombe, not far from River Thames

    Pericles Senior Member

    Hoytedow,

    Terrific effort & you look suitably shipshape & Bristol fashion in Noeettica's photo. I could be wrong (heavens forfend), but white beards seem to be de rigueur for some of us who would be afloat. To complete a far east of Cuba look (but only if it amuses you) here are examples of nautical headgear on my side of the pond.

    https://www.youtube.com/watch?v=u9xvrbfyKGQ

    https://www.google.co.uk/search?q=b...hTSVLrVAbDd7QanwoCYCQ&ved=0CAcQ_AUoAg&dpr=1.5

    https://www.google.co.uk/search?q=s...xTSVIHcG4bW7Aa3kIGYBw&ved=0CAYQ_AUoAQ&dpr=1.5

    I included the Swedish student link as it reminded me of when I was working over there & I was awakened one morning by a beautiful young student wearing nought, but the hat & her smile. It was my 25th birthday.................
     
  2. Doug Lord
    Joined: May 2009
    Posts: 16,679
    Likes: 349, Points: 93, Legacy Rep: 1362
    Location: Cocoa, Florida

    Doug Lord Flight Ready

    Pericles, I got all excited when you mentioned the naked Swedish lady-but she was nowhere to be found........Oh,well-it's the thought that counts- so thanks for that!
     
  3. hoytedow
    Joined: Sep 2009
    Posts: 5,857
    Likes: 400, Points: 93, Legacy Rep: 2489
    Location: Control Group

    hoytedow Carbon Based Life Form

    You made an excellent post, Pericles. Congratulations on having a fine 25th birthday. ;)
     
  4. whitepointer23

    whitepointer23 Previous Member

    Can't help much with oars. With mine I just screwed and glued a hardwood block on each gunnel in the most comfortable position and drilled a hole in each to take galvanized rowlocks from the boat chandlery. I had cheap oars. Next time I would buy quality oars. Cheap ones are horrible.
     
    1 person likes this.
  5. viking north
    Joined: Dec 2010
    Posts: 1,868
    Likes: 94, Points: 48, Legacy Rep: 1146
    Location: Newfoundland & Nova Scotia

    viking north VINLAND

    Hoyt, the approx. position of the oar lock on the gunnel is 11in. aft. of the aft. edge of the rowing seat. Run a plumb line up to the gunnel from the aft edge of the rowing seat, measure approx. 11 in. aft. of this point along the gunnel and that's the approx. location on the gunnel of the oar lock. I like the type of oar lock receiver that bolts to the inside of the gunnel as no large holes are drilled down thru the gunnel to weaken it ---- Geo.
     
    Last edited: Feb 5, 2015
    1 person likes this.
  6. Pericles
    Joined: Sep 2006
    Posts: 2,015
    Likes: 141, Points: 63, Legacy Rep: 1307
    Location: Heights of High Wycombe, not far from River Thames

    Pericles Senior Member

    I wondered about your terminology vis-à-vis the oarlocks, because over here we call the rowlocks, which we pronounce rollocks. As that pronunciation is akin to an insult, the accepted reply is R tholes, because oars generally are connected to the vessel by means of rowlocks or tholes. :)

    Does "catching a crab" mean the same over there as it does over here? :D
     
  7. hoytedow
    Joined: Sep 2009
    Posts: 5,857
    Likes: 400, Points: 93, Legacy Rep: 2489
    Location: Control Group

    hoytedow Carbon Based Life Form

    Thanks, Viking north. I put a sliding thwart since the bimini base is in the best place for the oarlocks/rowlocks/rollocks. Having attached them too far aft of the ice chest upon which I was to sit that seemed the best solution.
    Thanks, Pericles, for the idea regarding the thole pins. I was studying the ones on the Three Men in a Boat movie and may yet apply that option.


    I installed the sonar yesterday. :)
     
    Last edited: Feb 6, 2015
    1 person likes this.
  8. Noeettica
    Joined: Jun 2010
    Posts: 25
    Likes: 1, Points: 0, Legacy Rep: 1
    Location: BFE !

    Noeettica Junior Member

    I installed the fish-finder yesterday.

    But you Don't fish ...

    and why lock up an "oar" I just let them visit me from time to time ...
     
  9. hoytedow
    Joined: Sep 2009
    Posts: 5,857
    Likes: 400, Points: 93, Legacy Rep: 2489
    Location: Control Group

    hoytedow Carbon Based Life Form

    This thread is not about peccadillos, unless being addicted to boat-building would count as one.
    Onto what did you install your fish-finder?
     
  10. Pericles
    Joined: Sep 2006
    Posts: 2,015
    Likes: 141, Points: 63, Legacy Rep: 1307
    Location: Heights of High Wycombe, not far from River Thames

    Pericles Senior Member

  11. hoytedow
    Joined: Sep 2009
    Posts: 5,857
    Likes: 400, Points: 93, Legacy Rep: 2489
    Location: Control Group

    hoytedow Carbon Based Life Form

    What do you get when you cross and armadillo with a woodpecker?

    A peckerdillo.

    What do you get when you cross a rhinoceros with an elephant?

    Elephino.

    The boat has a 60 inch beam so I re-used the 8 feet long oars I already have.
     
  12. Pericles
    Joined: Sep 2006
    Posts: 2,015
    Likes: 141, Points: 63, Legacy Rep: 1307
    Location: Heights of High Wycombe, not far from River Thames

    Pericles Senior Member

    "I re-used the 8 feet long oars I already have."

    Re-used? Re-used! You've had to scull back to port already? Good grief Hoyt, they are only for show, not for use. A Englishman carries a brolly, not to use if it rains, but to hail a taxi! So should it be for you warmer climes residents. Call the Coastguard on your cellphone, then wait for the steam launch. :D
     
  13. hoytedow
    Joined: Sep 2009
    Posts: 5,857
    Likes: 400, Points: 93, Legacy Rep: 2489
    Location: Control Group

    hoytedow Carbon Based Life Form

    No, no, I meant I took them down off the rack and placed them into the boat. I have a wireless set for contacting the CG should the need arise, but the oars would make bloody good standards for supporting the distress flag in case we run short of tea.
     
  14. Pericles
    Joined: Sep 2006
    Posts: 2,015
    Likes: 141, Points: 63, Legacy Rep: 1307
    Location: Heights of High Wycombe, not far from River Thames

    Pericles Senior Member

    Phew, that's a relief. BTW, tea & tiffin is a phrase that does not mean nautical naughties with oars. http://en.wikipedia.org/wiki/Tiffin

    On another subject, I love gadgets & found these.

    http://www.crabhawk.com/

    https://www.youtube.com/watch?v=-7v8uiDWFnE

    http://www.anchorpullers.com/

    https://www.youtube.com/watch?v=SahVAAQHAzQ

    Confuse & amuse your compatriots with words from the lips of Kentish Men & Men of Kent.

    http://en.wikipedia.org/wiki/East_Kent

    Scroll down.

    http://www.bbc.co.uk/kent/voices2005/dictionary.shtml
     

  15. hoytedow
    Joined: Sep 2009
    Posts: 5,857
    Likes: 400, Points: 93, Legacy Rep: 2489
    Location: Control Group

    hoytedow Carbon Based Life Form

    Those are some cool gadgets.
     
Loading...
Similar Threads
  1. Brian Fredrik
    Replies:
    2
    Views:
    1,241
  2. CaptChap
    Replies:
    4
    Views:
    1,280
  3. hoytedow
    Replies:
    109
    Views:
    12,976
  4. cdubb
    Replies:
    7
    Views:
    5,242
  5. TANSL
    Replies:
    5
    Views:
    3,041
  6. AussieCraig
    Replies:
    7
    Views:
    5,841
  7. Eriefeeling
    Replies:
    12
    Views:
    4,482
  8. Divided Sky 24
    Replies:
    7
    Views:
    5,879
  9. nc2sea
    Replies:
    28
    Views:
    8,680
  10. Jamesblack
    Replies:
    9
    Views:
    3,176
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.