Balboa 19 on MacGregor 22 trailer?

I've found a great deal on a Balboa/Ensenada 19 ($250 for the whole rig) but the trailer is in rough shape. I've also found a good deal on a MacGregor 22 ($650) but it doesn't have sails. I was thinking about putting the Balboa on the Mac trailer. Would it fit correctly? Any advice?

 

Most likely it would 'fit' but adjustment would be recommended. You need to check that there are no pressure points that might dent the hull and you need to check tung weight is light enough for your tow vehicle and heavy enough to be stable. Since you are going smaller the boat will be forward and have higher weight on the ball. Most, if not all fittings, can be shifted on the trailer.

 

awesome, that's what I thought. And thanks for the thorough response

 

That's why I'm here!

You might drop a note on some of the sailing treads and find someone to take the venture off your hands cheap.

 

I'll keep that in mind, I was thinking that might try using it/modding as a trawler/fishing/messabout boat since I have three boys and my 14' Lone Star isn't really cutting it anymore but I'd prefer to see her sail.

 

If you set the bow stop about 18" back, the center of gravity won't change much.

 

thanks Gonzo