Bankrupt boat yard in Thailand

Discussion in 'All Things Boats & Boating' started by Frosty, Sep 18, 2011.

  1. brian eiland
    Joined: Jun 2002
    Posts: 5,067
    Likes: 216, Points: 73, Legacy Rep: 1903
    Location: St Augustine Fl, Thailand

    brian eiland Senior Member

    Isn't that one at Ocean Marina the Serenity Yard I reported here??*

    Serenity Shipyard Co. http://www.serenityshipyard.com/ This was a great find that I actually missed the first time around. I had stopped at Ocean Marina on my way down to Rayong and visited a few interesting multihulls docked in the relatively new marina. One in particular was a large 70-ish trimaran with a Portuguese style deckhouse/flybridge on it. The B&R type sailing rig was interesting as well. This vessel had a true ‘yacht finish’. There was a Thai captain onboard who spoke very little English, and the Russian captain was absent. Supposedly the vessel was built somewhere other than Thailand, and was in Thailand for various reasons, and had either a Japanese or Russian owner. Interesting vessel.

    Out on the hard at the back of the marina were several smaller catamaran ‘rocket ships’ of about 28-32 feet, and then of all surprises a 26 foot trimaran known as Firefly.!! Yes, unbelievably one of my own designs that we built 6 or 7 of in Annapolis MD. A group of guys had purchased in the Seattle area and shipped it over to Thailand….long conversation with one of the partners who was there working on the boat getting it ready for a launch soon.

    It had been hinted at, that this Ocean Marine site had been the original location where several magnificent 130’-138’ super sailing yachts had been built back in the 80’s, prior to the new hi-rise and yacht club of Ocean Marine. Mirabella I & III, and Philanderer are three I know of:
    http://www.mirabellayachts.com/mirabella5/
    http://www.eliteyacht.com/philanderer.htm

    But I just didn’t see a building of that size. Turns out half of that original building had been taken down and reconfigured. The concrete pad is still there

    And now there is a relatively new boatbuilder there, Serenity Yachts, that has very particular interest in multihull vessels. They had built a couple of ‘charter’ 70 footers (image ref), one located there at the marina, they had under construction a 52’ Schioning design and a 43’ Prout cat that he had bought the moldings for from Concordia.

    The managing director, Jean Obry, spent a lot of time in the charter and boat building business in France, so obviously he has a catamaran heart. If his name hadn’t been French, and he didn’t have a bit of French accent, I wouldn’t have believed he was French. He is a very knowledgeable boatbuilder, and one of the most ‘up front’, honest appearing guys I’ve ever met in the business. He has developed a method of keeping track of EVERYTHING in the factory without being obsessive about it. He can tell you how many rolls of tape were used on what vessels, and who took aspirin and when. Now this is the ultimate in cost control production. With this system of record keeping he can bill the client on a monthly basis rather than by stages. This keeps his cash flow problems to a minimum, and allows the client to keep tight control on the running cost of the project…..no BIG surprises to come up as with stage payments. And the client can get a full and exact incremental accounting as the project goes forward. Marvelous for both parties. Very few builders could ever offer such a payment plan as they don’t track things with this exactness.

    He is right up front with his charges to build, and that is basically his cost plus 20%. He bills labor out at 8 euro per hour. He builds in a set % additional charge on all equips added to the vessel to cover handling, installation, etc. In general he works on a time and materials basis to build a project rather than some guesstimate as to what the vessel will cost lump sum. He wants to make an honest 20% profit.

    So the client is only left with the questions of will he ‘pad’ the bill, or will he have competent folks working on the project that won’t be ‘learning’ at the client’s expense. With his record keeping and honesty, I don’t think you will find any ‘padding’ of the bill. Besides on a monthly billing basis it would be easy to detect. He did another smart thing. He located himself right in the old facility utilized by those fellows that spent 10 years building those super yacht 138’s. He is surrounded by a work force that was trained for those years…he has some real experienced workers from what I can tell….and all the extras he might need in a sudden overload situation.

    Composite boatbuilding in Thailand, or other hi-humidity situations, can be a problem. All of his materials, cores, fabrics, resins are stored in a temp and humidity controlled room that has 24 hour monitoring and recording devices. He has assumed control of a metal working facility directly adjoining his space. If you saw the workmanship on these stainless pieces you would want even more of it on your vessel. But be careful our light-weight multihulls should try to restrain themselves from those obsessively heavy big stainless fixtures. Beautiful work though. And he is building for other manufacturers & marketers.

    Summary: This builder would be very high on my list of potentials. I think the yacht quality is attainable, and I think you would get a most honest accounting for the work. I believe he might be able to construct at least two 70 foot cats, possible 3 simultaneously along side several smaller projects he might have. There might be some cost savings in simultaneous constructions of identical designs
     
  2. brian eiland
    Joined: Jun 2002
    Posts: 5,067
    Likes: 216, Points: 73, Legacy Rep: 1903
    Location: St Augustine Fl, Thailand

    brian eiland Senior Member

    BTW Frosty, I sent you a private message/email about your prop shaft arrangement on your vessel
     
  3. Alik
    Joined: Jul 2003
    Posts: 3,075
    Likes: 357, Points: 93, Legacy Rep: 1306
    Location: Thailand

    Alik Senior Member

    Brian, how long haven't You been in OM? There are few new builders, two of them are building 60' cats from us. Our 90' was also built in OM in rental space...
     
  4. Frosty

    Frosty Previous Member


    ?????????????????????? when.

    Didnt get it!!
     
  5. brian eiland
    Joined: Jun 2002
    Posts: 5,067
    Likes: 216, Points: 73, Legacy Rep: 1903
    Location: St Augustine Fl, Thailand

    brian eiland Senior Member

    Its been a couple of years since I visited those yards. BTW what is OM?

    I'm in Thailand now, and plan on coming down to the gulf area in a week or so.
     
  6. brian eiland
    Joined: Jun 2002
    Posts: 5,067
    Likes: 216, Points: 73, Legacy Rep: 1903
    Location: St Augustine Fl, Thailand

    brian eiland Senior Member

    Sorry sent as private email first time and just discovered that did not go thru. So I just sent it as 'private message'
     
  7. Alik
    Joined: Jul 2003
    Posts: 3,075
    Likes: 357, Points: 93, Legacy Rep: 1306
    Location: Thailand

    Alik Senior Member

    OM is Ocean Marina.

    Pls stop by to see us; we are on Sukhumvit, impossible to miss!
     
  8. Frosty

    Frosty Previous Member

    I would not call on you but where are you ? you say suhkumvit,--thats 160Km long Bangok to Sattahip.
     
  9. Alik
    Joined: Jul 2003
    Posts: 3,075
    Likes: 357, Points: 93, Legacy Rep: 1306
    Location: Thailand

    Alik Senior Member

    Pls chk map on company web
     
  10. sabahcat
    Joined: Dec 2008
    Posts: 792
    Likes: 28, Points: 0, Legacy Rep: 273
    Location: australia

    sabahcat Senior Member

  11. Frosty

    Frosty Previous Member

    Something not quite right here. Concorde yachts was parallel with the highway and the shed is now half the size, I was employed as consultant once there fore a project on Mirrabella. Half the shed was taken by Bill Gassons Buzcat, they built one only.

    The biggest shed now is not parallel to the road and make lots of cats I dont know what. I have a troll through sometimes..

    They are rebuilding the Marina shortly this years but are still booked up
     
  12. brian eiland
    Joined: Jun 2002
    Posts: 5,067
    Likes: 216, Points: 73, Legacy Rep: 1903
    Location: St Augustine Fl, Thailand

    brian eiland Senior Member

    This inspection tour was at least 2 years ago. Prior to my coming to that facility I had corresponded with a gentlman by the name of Andy Pitt (I believe I still have a contact info for him). He was no longer there.

    What confused me originally is that the original company that built 138' Mirabella was named Concorde Yachts. This other company that built the Dixon 69 cat was Concordia Yachts located in Rayong. This company eventually renamed itself and turned the Dixon vessel into a Prout cat.

    Here is something I remeber finding that further leds to CONFUSION
    "Prout International sells Factory-Direct yachts, eliminating the 15% – 25% markup that dealers typically add to the boat’s price. Prout has eliminated this costly dealer distribution network system by having in-house catamaran professionals who operate globally and will guide and advise you throughout the process of creating the yacht of your dreams from our extensive product line of power and sailing multihulls. You will also receive after sales service and back up factory direct, globally.

    Prout Catamarans are built in China and Thailand where labor is a fraction of the cost of Europe but the quality is equal or better. Using this competitive advantage Prout is able to produce labor intensive, high end touches to its yachts such as: compound curved high tensile safety glass in the saloon windows (versus inexpensive Plexiglas), inlaid woods, marble countertops, to name a few. Because Prout is able to purchase materials from source in the Far East at substantially reduced prices we can afford to deliver top quality Custom yachts at great prices. The re-sale value of Prout Catamarans is well protected because the used market is not flooded with inexpensive charter versions that drive the price down, even if the yacht has never been chartered.

    Prout International builds the finest luxury yachts in the world. Its Catamaran division, Prout Catamarans, is the most prestigious catamaran brand in the world. Prout Catamarans was founded in 1954 by Roland and Francis Prout. In 50 years of production over 2,000 cruising catamarans were built. In later years the success of the company declined and in the year 2000 it was sold to Quest of Canada. When it was realized that Prout could not thrive in such a high cost environment, Quest restructured. For six years, the Prout design team modernized and re-tooled the range to meet current market trends and designs with a new generation of catamarans. Prout decided to relocate to Rayong, Thailand and Zhuhai, China for its first Far East manufacturing facility and refocused to segregate its products and specialize in each step of the manufacturing process.

    Prout truly has a global presence. Currently Prout is part of a large, well funded corporation which has a diverse portfolio of businesses ranging from construction and property holdings to aerospace and ship building industries. Prout belongs to the Winfair Marine group, part of Celebrity Yachts which includes three yacht building operations: a shipyard in Rayong, Thailand, the joint-venture Dalian Songliao-Celebrity Marine Co. Ltd. (Dalian, China), and Winfair Marine (Zhuhai) Co. Ltd. (Zhuhai, China). Our Thailand shipyard is the largest shipyard in South East Asia. Prout entered a 50/50 joint venture with a military shipyard in Dalian to diversify into other areas. Prout also recently opened the first of its two Zhuhai shipyards. The next shipyard in Zhuhai is even bigger. Prout is a real player in the global catamaran market and is setting the standard once again with new designs and innovations in its products. Prout International is expanding to include 10 different lines of products."


    These guys have had more name changes, and changes in description, and lack of full info, etc that I wonder what the heck is going on?? :confused:

    On top of that I see their 72 footer is now for sale....uncompleted of course :rolleyes:
    http://www.yachtworld.com/boats/2012/Concordia-72SC-2392240/Thailand

    And now they have some big trimaran project going on :rolleyes:
    http://www.proutinternational.com/media/Winfair.pdf
    "Already, Winfair is building a 138-foot trimaran in Zhuhai that has been sold. Sea trials are due in November 2009. Clearly, Winfair and the Prout brand are moving ahead quickly.".....right :rolleyes:
     
  13. Alik
    Joined: Jul 2003
    Posts: 3,075
    Likes: 357, Points: 93, Legacy Rep: 1306
    Location: Thailand

    Alik Senior Member

    Brian, talking about this strange-maran:
    http://www.proutinternational.com/media/Winfair.pdf
    I have seen it in 2006 'as will be launched soon'. There is absolutely no engineering behind; I pointed that side hulls were of small volume and shifted back causing significant bowdown trim when heeled. Seems they moved them after that; but all together it is just a marketing blurb.

    Then, this boat:
    http://www.yachtworld.com/core/list...back=boatDetail.jsp&boat_id=2392240&noOfPic=7
    I met the owner couple of times when he was looking for survey; told me a lot of interesting stories... Later, the boat was completed at owner's cost.
     
  14. brian eiland
    Joined: Jun 2002
    Posts: 5,067
    Likes: 216, Points: 73, Legacy Rep: 1903
    Location: St Augustine Fl, Thailand

    brian eiland Senior Member

    Just found some photos of that Concordia yard
     

    Attached Files:


  15. brian eiland
    Joined: Jun 2002
    Posts: 5,067
    Likes: 216, Points: 73, Legacy Rep: 1903
    Location: St Augustine Fl, Thailand

    brian eiland Senior Member

    Did you go check that boat out? Got any details, or did you decide to buy it?
     
Loading...
Similar Threads
  1. Ike
    Replies:
    44
    Views:
    4,832
  2. pontoonmatt
    Replies:
    2
    Views:
    432
  3. batteau62
    Replies:
    2
    Views:
    691
  4. Michael333m
    Replies:
    7
    Views:
    1,234
  5. laukejas
    Replies:
    1
    Views:
    685
  6. jungle3024
    Replies:
    8
    Views:
    1,259
  7. Sticky_Fingers
    Replies:
    1
    Views:
    718
  8. rcfind
    Replies:
    1
    Views:
    546
  9. Squidly-Diddly
    Replies:
    8
    Views:
    1,063
  10. Vineet
    Replies:
    6
    Views:
    828
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.