What is the easiest way to satisfy this fire extinguishing requirement?

Discussion in 'Class Societies' started by ldigas, Jan 17, 2012.

  1. ldigas
    Joined: Feb 2011
    Posts: 189
    Likes: 5, Points: 18, Legacy Rep: 60
    Location: Zagreb, Croatia

    ldigas Senior Member

    [GL 3-G-1.8.] Craft with a length of 15m or more are to be provided with a water fire extinguishing installation ...

    I never recall (on boats of just a bit above that size, say to 20m) seeing anything regarding fire extinguishing, apart from traditional CO2 bottles.

    How is this requirement usually satisfied? I mean, what is the easiest system to install that will satisfy that requirement?


    A plastic hose connected to a bilge pump? (guessing off the top of my head here)
     
  2. gonzo
    Joined: Aug 2002
    Posts: 16,796
    Likes: 1,718, Points: 123, Legacy Rep: 2031
    Location: Milwaukee, WI

    gonzo Senior Member

    A plastic hose will not satisfy the requirement. A regular fire hose will. A bilge pump takes water from the bilge so will not work either. You need a high pressure, high volume pump connected to a through-hull fitting to supply it with water.
     
  3. ldigas
    Joined: Feb 2011
    Posts: 189
    Likes: 5, Points: 18, Legacy Rep: 60
    Location: Zagreb, Croatia

    ldigas Senior Member

    I know, but this is a boat of 15.8m which has been lengthened from a 14.8m boat (don't ask). They used to have 2 CO2 bottles, and now the inspector is bugging them over that pump ("classification society inspector" <- is there a better term for this in english?).

    I don't even know where they could install it (space is limited) so that it could be reachable. That is why I'm asking for workarounds, so to put it.
    From what I read in the rules, a bilge pump can be used for this purpose (reversible, I guess?).
     
  4. gonzo
    Joined: Aug 2002
    Posts: 16,796
    Likes: 1,718, Points: 123, Legacy Rep: 2031
    Location: Milwaukee, WI

    gonzo Senior Member

    A bilge pump won't probably have the pressure or volume to satisfy the rule. A temporary water pickup, like a hose off the side, may work.
     
  5. ldigas
    Joined: Feb 2011
    Posts: 189
    Likes: 5, Points: 18, Legacy Rep: 60
    Location: Zagreb, Croatia

    ldigas Senior Member

    Sigh ... it looks the easiest way in the end will be to install a small pump after all.

    Hose off the side ... they have a rather large freeboard, I don't think the bilge pump would be able to "take it".

    Do you perhaps know what kind of pumps are installed for that purpose? I see nothing in the Vetus catalogue, under "fire protection pumps" or anything similar ("high pressure pumps" also nothing)?
     
  6. michael pierzga
    Joined: Dec 2008
    Posts: 4,862
    Likes: 116, Points: 0, Legacy Rep: 1180
    Location: spain

    michael pierzga Senior Member

    A Steimel type KB twin chamber centrifugal pump is widely used on yachts.. One chamber is used for raw water cooling the engine , one chamber is avaible for water pumping. Its a 3000 euro pump. Better get approval for fire fighting before purchase. Engine driven pumps for firefighting are poor seamanship. http://www.steimel.com/download/prospekte/pumpen_en.pdf
     
  7. ldigas
    Joined: Feb 2011
    Posts: 189
    Likes: 5, Points: 18, Legacy Rep: 60
    Location: Zagreb, Croatia

    ldigas Senior Member

    I'm hoping for some cheaper solution. They already have everything on board (including the bilges); just missing this piece. Are there some small high pressure pumps available perhaps, that would be *just enough* to satisfy this?

    Do you know perhaps?
     
  8. Submarine Tom

    Submarine Tom Previous Member

    What about simply asking the inspector?

    -Tom
     
  9. ldigas
    Joined: Feb 2011
    Posts: 189
    Likes: 5, Points: 18, Legacy Rep: 60
    Location: Zagreb, Croatia

    ldigas Senior Member

    The project's finished, even the reconstruction is almost finished ... aparently someone just overlooked this detail.

    I could ask the inspector, but I don't know the fella, and the boat is some 500km away ... I was just asked to think of some simple (read: cheap) solution/workaround around this, that would just satisfy this.
    I don't think the inspector will put much trouble on it, but he wants *something* to be there.
     
  10. michael pierzga
    Joined: Dec 2008
    Posts: 4,862
    Likes: 116, Points: 0, Legacy Rep: 1180
    Location: spain

    michael pierzga Senior Member

    The typical fire pump for a yacht is a small diesel engined portable. They are not cheap but they are what is required to make inspection.
     
  11. Stumble
    Joined: Oct 2008
    Posts: 1,913
    Likes: 73, Points: 48, Legacy Rep: 739
    Location: New Orleans

    Stumble Senior Member

    You might want to think about a dewatering pump like http://www.waterpumpsdirect.com/Champion-65525-Water-Pump/p6945.html I don't know what your flow rate requirements are, but this type of pump is also commonly carried for emergency bilge pumping, and can do double duty as a fire pump. It just depends on where you put the inlet hose.
     
  12. powerabout
    Joined: Nov 2007
    Posts: 2,944
    Likes: 67, Points: 48, Legacy Rep: 719
    Location: Melbourne/Singapore/Italy

    powerabout Senior Member

    just get ABS or DNV class and you wont have to worry
     
  13. gonzo
    Joined: Aug 2002
    Posts: 16,796
    Likes: 1,718, Points: 123, Legacy Rep: 2031
    Location: Milwaukee, WI

    gonzo Senior Member

    Dewatering pumps don't have enough head for a firefighting pump. We all want cheap, but there is minimum cost for every piece of equipment. What is the flow and pressure at what head you are required?
     
  14. hoytedow
    Joined: Sep 2009
    Posts: 5,857
    Likes: 400, Points: 93, Legacy Rep: 2489
    Location: Control Group

    hoytedow Carbon Based Life Form


  15. ldigas
    Joined: Feb 2011
    Posts: 189
    Likes: 5, Points: 18, Legacy Rep: 60
    Location: Zagreb, Croatia

    ldigas Senior Member

    That looks like an okey solution; I'll recommend they try to find something like that. Probably could find a cheaper model in this part of the world, if they tried.

    @gonzo - couldn't say. Will return home for the weekend, and then look at the numbers. I'm on a trip right now, and don't have my work laptop with me (and I'm very happy about that :))
     
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.