looking for tribon tutorials

Discussion in 'Software' started by rohinit, Sep 2, 2009.

  1. cugior
    Joined: Apr 2011
    Posts: 3
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Italy

    cugior New Member

    Tribon surfaces

    Hi. I have imported a .sap surface file in surface/compartment and i have generate the dm file but i can use it in Basic Design. Must I have a closed surface? Must i create an envelope?
    Can someone help me? thanks in advance
     
  2. vinafk
    Joined: May 2011
    Posts: 10
    Likes: 0, Points: 0, Legacy Rep: 6
    Location: NORGE

    vinafk Junior Member

    how you generate *.dml file?
     
  3. cugior
    Joined: Apr 2011
    Posts: 3
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Italy

    cugior New Member

    I haven't generate dml file. Is it necessary?
     
  4. KMgreece
    Joined: Jul 2011
    Posts: 2
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Greece

    KMgreece New Member

    tutorial for surface?



    Hello! My name is Kostas and I am a naval architecture student from Greece. Is there a place with tutorials on how to properly insert surface from rhino (rhino marine) to tribon. I tried the acis sat file way but although the surface is imported I can't get it working on calc & hydro :(
     
  5. zeroname
    Joined: Oct 2008
    Posts: 276
    Likes: 5, Points: 0, Legacy Rep: 90
    Location: Europe

    zeroname Naval Architect

    generate new lines in surface modules, open it in lines module, then make new surface and save it as DML file. after that u can work with any module with the *.dml file.
     
  6. KMgreece
    Joined: Jul 2011
    Posts: 2
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Greece

    KMgreece New Member

    Hello! Sorry if I ask very simple questions but I am totaly new to tribon usage and still getting around. can you tell me how can I do this or even better where can I find a tutorial so I wouldn't have to ask and bother you with basic stuff.. All day I've been trying to export .bri files from rhino surface via fastship program e.t.c but can't get it to work.

    MY BASIC PROBLEM IS THIS : I created a surface in rhino (and rhino marine) and with cage edit I managed to get the exact LCB and Δ that I wanted. Then I insert this surface into tribon (sat acis file) but can't set any compartments!!!

    I don't know how to get lines out of the surface and all day I ve been trying to extract sections (and stem profile) but since I HAVE THE SURFACE (and in tribon it even shows it in meshes so it does 'understand' it), there must be a better and above all most accurate way to get again the surface I allready have :( any help will be greatly valued! thank!
     
  7. chandru447

    chandru447 Previous Member

    tribon

    hope i can help you with tribon set up if you are interested...
     
  8. bharatverma2511
    Joined: Mar 2012
    Posts: 1
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: colombia

    bharatverma2511 Graduate Naval Architect

    Hello Chandru,

    Thanks for the reply. I would appreciate if you can help me in learning the basic design modules of Tribon. It will be grt if u have some sample project to start with.

    Thanks;
    Bharat
     
  9. pdmsvn
    Joined: Jun 2014
    Posts: 46
    Likes: 8, Points: 8, Legacy Rep: 10
    Location: Vietnam

    pdmsvn Junior Member

    Hello everybody,
    We have document training about module LINE in Tribon and will train for who is interesting with it. You can buy training tutorial video from us and practice. Please contact me via email: pdmsvtvn@gmail.com
     
  10. adajko
    Joined: Feb 2017
    Posts: 1
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: ATHENS

    adajko New Member

    Tribon Export Xml File For Calc & Hydro

    Hi folks,

    I really need your help.
    I have completed my 3d model at surface& compartment and i want to import the xml file at calc & hydro in order to make all necessary calculations regarding the loading conditions etc..., but it is not available to export the file from Surface& compartemnt. as geometry file as there is no option for xml file.
    Can someone please guide in order to import the geometry file at calc& hydro in order to start my calculations.
    It would really help a tutorial if there is any.

    Many thanks in advance!!
     

  11. Beeran
    Joined: Oct 2017
    Posts: 2
    Likes: 0, Points: 1
    Location: India

    Beeran New Member

    Here is the complete simple tutorial for Tribon M3
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.