power tools

Discussion in 'All Things Boats & Boating' started by Frosty, Jun 27, 2011.

  1. Frosty

    Frosty Previous Member

    What that new saw?

    It looks like a jig saw but the blade sticks out the front and sweeps left and right ( depending on how you hold it) rather than goes up and down like a jig. Ive seen a guy use it on the telly to make a nice neat hole in some plaster board.

    I can't find it on the internet but then I don't know what they call it.

    I would like one to cut neat, less dust holes in fibre glass for interior work.
     
  2. KnottyBuoyz
    Joined: Jul 2006
    Posts: 829
    Likes: 56, Points: 0, Legacy Rep: 685
    Location: Iroquois, Ontario

    KnottyBuoyz Provocateur & Raconteur

    I think they're called "oscillating" saws. The Cdn version is called Multi-Max.
     
  3. anthony goodson
    Joined: Mar 2007
    Posts: 451
    Likes: 19, Points: 18, Legacy Rep: 256
    Location: Dorset UK & Murcia Spain

    anthony goodson Senior Member

    Afternoon Frosty ,Bosch PMF180E offers the best DIY value in this very versatile tool ,wouldn't be without it.
     
  4. Poida
    Joined: Apr 2006
    Posts: 1,188
    Likes: 51, Points: 48, Legacy Rep: 497
    Location: Australia

    Poida Senior Member

    Are you sure that's what you really want it for Frosty?
    You could fit your own oscillating attachment on the end, or am I leading you a bum steer.
     
  5. cthippo
    Joined: Sep 2010
    Posts: 813
    Likes: 52, Points: 28, Legacy Rep: 465
    Location: Bellingham WA

    cthippo Senior Member

    Like a roto-zip?
     
  6. Saildude
    Joined: Jun 2011
    Posts: 84
    Likes: 9, Points: 0, Legacy Rep: 119
    Location: Seattle, Washington, USA

    Saildude Junior Member

    The saw blade sweeps back and forth sideways - quite handy for certain apps and you can get sanding pads for it and it will get into corners nicely.
     
  7. Frosty

    Frosty Previous Member

    I want to modify a bathroom window on the boat. I don't want to grind it out or as you can imagine we will be in a snow storm of fibre glass dust, whos gonna wanna take a shower in there.

    Fine controlled cutting and sanding sounds good.
     
  8. PAR
    Joined: Nov 2003
    Posts: 19,126
    Likes: 498, Points: 93, Legacy Rep: 3967
    Location: Eustis, FL

    PAR Yacht Designer/Builder

    Bolt a oscillating blade to a detail sander and you've got a home made, saw as you've described, without forking out lots of bucks.

    This is a Dremel brand blade bolted to a Ryobi detail sander. These tools are called "Multi tool" by several brands. Harbor Freight sells two versions of this, one 40 and the other 60 bucks. Mine works as well and the blade cost $10 and I had the two #6 machine screws and lock nuts in house. It still works as a detail sander, which is a tool I rarely use anyway.
     

    Attached Files:

  9. bntii
    Joined: Jun 2006
    Posts: 731
    Likes: 97, Points: 28, Legacy Rep: 1324
    Location: MD

    bntii Senior Member

  10. Poida
    Joined: Apr 2006
    Posts: 1,188
    Likes: 51, Points: 48, Legacy Rep: 497
    Location: Australia

    Poida Senior Member

    Looks like a patented tool you've copied there Par.:mad:
     
  11. PAR
    Joined: Nov 2003
    Posts: 19,126
    Likes: 498, Points: 93, Legacy Rep: 3967
    Location: Eustis, FL

    PAR Yacht Designer/Builder

    Actually the patent has run out on this particular novelty and modifying a tool with a different blade isn't copying, though it does employ some features seen in other tools. I have several dozen home made tools, some certanily taking desirable features from other things I've seen. It's a good thing the wings on aircraft patent has run out or there would be an awful lot of helpless passenger airliners.
     
  12. Frosty

    Frosty Previous Member

    But how do you know if it does the same thing maybe the travel is different.

    A sander does not move that much , but a saw has to cut.

    Maybe I could just fasten a blade onto my phone on vibrate.
     
  13. Saildude
    Joined: Jun 2011
    Posts: 84
    Likes: 9, Points: 0, Legacy Rep: 119
    Location: Seattle, Washington, USA

    Saildude Junior Member

    Yes Frosty - once a Mechanical Engineer always a Mechanical Engineer - hard to hide the roots and history :)
     
  14. Frosty

    Frosty Previous Member

    Ive just looked at this being used on youtube --it seems very impressive and when it stops raining.......

    Maybe Mohameds tool emporium may have one. Bosch of course,--only bosch, I cant kill a bosch, yes there maybe better but for me the price is right and the tool works fine unlike Black and Decker which should be banned from the market.

    Makita in Thailand carries no warranty, yup Bosch for me.
     

  15. anthony goodson
    Joined: Mar 2007
    Posts: 451
    Likes: 19, Points: 18, Legacy Rep: 256
    Location: Dorset UK & Murcia Spain

    anthony goodson Senior Member

    If you do buy Bosch, make sure you get a metal cutting blade ,the ones for wood won't last. Some of the earlier Fein blades will fit ,but I was given a new set recently that won't ,check before you buy.
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.