New engine sends shock waves through auto industry

Discussion in 'Hybrid' started by Pericles, Apr 9, 2011.

  1. Pericles
    Joined: Sep 2006
    Posts: 2,015
    Likes: 141, Points: 63, Legacy Rep: 1307
    Location: Heights of High Wycombe, not far from River Thames

    Pericles Senior Member

  2. Dave Gudeman
    Joined: Nov 2009
    Posts: 135
    Likes: 27, Points: 0, Legacy Rep: 359
    Location: San Francisco, CA, USA

    Dave Gudeman Senior Member

    Interesting. I hope this isn't yet another great new motor design that just doesn't work out.

    I can't figure out how it works, though. It looks like a rotary engine, and I've never been able to understand them either --the pressure inside the chamber somehow causes more force in one direction than the other, creating a net force in the direction of rotation.

    It is clear how pistons work: the pressure causes a force on the piston head. When the force caused by gas pressure is greater than the forces in the opposite direction then the piston moves. With rotary engines the gas pressure causes a force in the direction of rotation, but it also causes a force in the opposite direction (on the "back" of the chamber wall). I don't see how there is a net force on the rotor in one direction or another from gas pressure. I mean, I believe there is a net force because the engines work --I just don't see where it comes from.
     
  3. hoytedow
    Joined: Sep 2009
    Posts: 5,857
    Likes: 400, Points: 93, Legacy Rep: 2489
    Location: Control Group

    hoytedow Carbon Based Life Form

    I will believe it when, but not until, I see it. =)
     
  4. Pericles
    Joined: Sep 2006
    Posts: 2,015
    Likes: 141, Points: 63, Legacy Rep: 1307
    Location: Heights of High Wycombe, not far from River Thames

    Pericles Senior Member

    We'll have to stack it up with EEstor and see what becomes of both, or either, or neither?

    http://eestor.biz/

    Orville Wright would have approved. :):)

    P
     
  5. powerabout
    Joined: Nov 2007
    Posts: 2,944
    Likes: 67, Points: 48, Legacy Rep: 719
    Location: Melbourne/Singapore/Italy

    powerabout Senior Member

    is it a pulse jet motor but a rotary one?
    I'l wait till I read it in an SAE journal
    Might be good as an outboard
     
  6. Yellowjacket
    Joined: May 2009
    Posts: 664
    Likes: 113, Points: 43, Legacy Rep: 447
    Location: Landlocked...

    Yellowjacket Senior Member

    The concept is actually quite clever. Previously pulse detonation engines used passages in a drum to try to raise the pressure on one side of the rotor. Problem with that is that the passages don't scavenge completely, and a lot of the pressure gain from the constant volume combustion is lost at off design conditions.

    In this system the combustion pulse is contained in the rotor and is diverted to a tangential velocity, which in turn drives the rotor as the pulse comes out of the rotor.

    What it has over previous pulse detonation engines is that the spinning rotor builds pressure, so it can scavenge itself. The radial compressor effect provides an additional pressure, but the pressure pulse traveling up the rotor at supersonic speed has a shock wave that increases the pressure as the wave goes up the rotor. When the combustion isn't taking place the rotor passage looks like a compressor, so it creates pressure that, after the combustion process takes place can purge the passage.

    As I said, very clever. Think of it as a compressor, combustor and turbine all in one rotor all in one place at different times.

    This type of engine may not be well suited for off speed or off design operation, but, if it is as efficient as they say, then it has the potential to be an excellent engine for a hybrid where you can spin it up to high speed with the generator and let it run, like a single spool turbine. Not well suited at all for a conventional drive system since it might idle at more than 80% speed. Trying to clutch and shift a single spool turbine is a really difficult thing, and the speed range of the engine will likely be relatively small, that's why it makes sense for a hybrid drive.
     
  7. Frosty

    Frosty Previous Member

    This article is being considered for deletion in accordance with wikepedias deletion policy.

    Not the sort of confidence I was looking for slapped across a site I am reading for educational purposes.

    A "fictional" engine of this kind will not be able to idle and pull away from the lights giving smooth acceleration through gear changing. The problem is RPM spooling and the wait needed to change a gear.

    As with turbines --great for aircraft but needs RPM and gear reduction for torque with gearboxes possibly wieghing more than the engine.
     
  8. Ad Hoc
    Joined: Oct 2008
    Posts: 7,773
    Likes: 1,678, Points: 113, Legacy Rep: 2488
    Location: Japan

    Ad Hoc Naval Architect

  9. powerabout
    Joined: Nov 2007
    Posts: 2,944
    Likes: 67, Points: 48, Legacy Rep: 719
    Location: Melbourne/Singapore/Italy

    powerabout Senior Member

    I love this stuff
    "thermal efficiency of 60% double that of existing ic engines"
    a large ship engine is about 50%

    Not to mention adiabatic engines, no cooling system
    Cummins built some in the late 70's ( for the US gov) with the then ceramic technology and said ok lets wait till the ceramic technology is workable..still waiting
     
  10. Jimbo1490
    Joined: Jun 2005
    Posts: 785
    Likes: 41, Points: 28, Legacy Rep: 527
    Location: Orlando, FL

    Jimbo1490 Senior Member

    I really like the Quasiturbine. It's simple and very configurable for different fuels and combustion methods. Since it's a positive displacement design, you can expect plenty of useful torque.

    About 15 years ago I participated in an SBIR Request for Proposal for a gun-launchable engine. My proposal was to turn a Lysholm Screw into an engine. A competing proposal using a Wankel won the bid.

    Just about any architecture that can be used to compress a gas can also be turned into an engine.

    Jimbo
     
  11. FAST FRED
    Joined: Oct 2002
    Posts: 4,519
    Likes: 111, Points: 63, Legacy Rep: 1009
    Location: Conn in summers , Ortona FL in winter , with big d

    FAST FRED Senior Member

    "Just about any architecture that can be used to compress a gas can also be turned into an engine."

    Yes BUT , sadly efficiency , cost to build and maintain are not the drivers of new tech,

    The AIR POLICE , still stuck with the global warming fraud are the key to what gets manufactured.
     
  12. powerabout
    Joined: Nov 2007
    Posts: 2,944
    Likes: 67, Points: 48, Legacy Rep: 719
    Location: Melbourne/Singapore/Italy

    powerabout Senior Member

    the air police have made it possible over the last 30 years to actually see the sky in SoCal
    and force efi engines on us all
    (is that good or bad?)
     
  13. Yellowjacket
    Joined: May 2009
    Posts: 664
    Likes: 113, Points: 43, Legacy Rep: 447
    Location: Landlocked...

    Yellowjacket Senior Member

    The folks already said it was intended for power generation or use in a hybird, where the engine can run at load and constant speed. It isn't intended for use as a directly coupled prime mover.... Remember too, that the faster you spin a generator, the smaller it is for the same power. If you are trying to generate electricty speed is good. We have a 1 megawatt alternator for a turbine that spins at 36,000 rpm, and it weighs only 200 pounds. If you want weight efficiency, spin an alternator fast.

    Sorry Frosty, but that simply isn't true. Let me give you an example. The Allison Model 250 turboshaft makes 500 hp, and has a gearbox that reduces the speed from the turbines 36,000 rpm down to a usable 6,000 rpm. The entire engine AND gearbox weigh only 160 pounds. An important thing about a turbine is that the power does not come in pulses like on a reciprocating engine. A typical 6 cylinder reciprocating engine has power pulse peaks that are twice the average torque. Add to that the fact that engines like diesels are low speed machines that make a lot of torque and need big robust gears to handle the torque and the power pulses. By comparison, turbine gearboxes are relatively light and don't weigh more than the engine (which is pretty darn light to start with).
     
  14. Yellowjacket
    Joined: May 2009
    Posts: 664
    Likes: 113, Points: 43, Legacy Rep: 447
    Location: Landlocked...

    Yellowjacket Senior Member

    There are literally hundreds of engine concepts out there, and as Jimbo said, just about anything that can pump air can be made into an engine. The problem with most of those concepts (and I include the Quasiturbine in this) is that there are sealing "issues" that make leakage a big probelm, or there are dynamic issues that prevent the thing from turning very fast. The good old conventional pistion engine has been refined to the point where it is very hard to beat.

    If you want more power per unit weight, turbomachinery will move more air than a piston arrangement, at generally a loss of thermal efficiency.

    There are some new turbine engines that are being tested that have thermal efficiency very close to a diesel, I could say more but I'd have to shoot you after I told you. ;)
     
    1 person likes this.

  15. Ad Hoc
    Joined: Oct 2008
    Posts: 7,773
    Likes: 1,678, Points: 113, Legacy Rep: 2488
    Location: Japan

    Ad Hoc Naval Architect

    I’m with Frosty on this one, as the figures you posted here don't add up to real GTs in real boats.

    The last GT powered vessel we designed was spinning at circa 17-18,000RPM, so less than you quote.

    Yet the g/box to drive the waterjets weighed in at close to 2 tonne.

    It is a fallacy that GT, the whole installation, is lighter.
     
Loading...
Similar Threads
  1. boat fan
    Replies:
    16
    Views:
    4,870
  2. DaS Energy
    Replies:
    27
    Views:
    6,503
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.