How to reinforce a wood/fibreglass trimaran's bottom?

Discussion in 'Boat Design' started by joceline, Jan 16, 2011.

  1. joceline
    Joined: Jan 2011
    Posts: 22
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Europe

    joceline Junior Member

    Hi I'm very new to boat design. I'm studying to build a trimaran out of plywood and fibreglass. The boat will only travel on a river.

    The problem is that there's many obstacles in this river (dead wood, rocks, sandbanks, etc...).

    So I'm wondering how I can best reinforce the bottom and bow of the hulls?

    Can I use a steel plate inside/outside the hulls for strength? How should I attach it to the wood, so that I can still easily put the layers of fibreglass/epoxy onto them?

    Thanks for any help.

    Joceline.
     
  2. PAR
    Joined: Nov 2003
    Posts: 19,126
    Likes: 498, Points: 93, Legacy Rep: 3967
    Location: Eustis, FL

    PAR Yacht Designer/Builder

    It's best to approach the problem a little differently then you seem to be. What will the speed of the boat be? How is the boat currently constructed? Why do you think it's unable to tolerate the impacts of debris and other floating or fixed indignities? I mention this because these are fairly common issues, addressed in the design process or considered during repairs or upgrades, suggesting your current experience level, hasn't exposed you to the usual solutions employed.

    It might be easier to give us the year, make and model of trimaran you'd like to modify. Where you'll sail this boat (specifically) and a little more detail as to why you think this boat isn't sufficiently equipped to cope with your boating area.
     
  3. Landlubber
    Joined: Jun 2007
    Posts: 2,640
    Likes: 125, Points: 0, Legacy Rep: 1802
    Location: Brisbane

    Landlubber Senior Member

    ...and also why a tri, why not a cat, or flat bottom boat and how big is this boat...and main purpose of use.
     
  4. PAR
    Joined: Nov 2003
    Posts: 19,126
    Likes: 498, Points: 93, Legacy Rep: 3967
    Location: Eustis, FL

    PAR Yacht Designer/Builder

    I don't think hull configuration is particularly import, though size, speed, weight and intended use are.
     
  5. BATAAN
    Joined: Apr 2010
    Posts: 1,614
    Likes: 101, Points: 0, Legacy Rep: 1151
    Location: USA

    BATAAN Senior Member

    Lighter is better maybe when you hit rocks, but then, heavier is stronger. Intended use designs the boat for you if you look at it properly.
    Steel reinforcement in a trimaran is not the usual approach, but extra layers of cloth and epoxy are.
    Why a tri? They have very little interior space for the expense (3 hulls etc), tack slowly and are hard to berth. Cats are better, but monohulls are the usual approach to a boat design conundrum.
     
  6. PAR
    Joined: Nov 2003
    Posts: 19,126
    Likes: 498, Points: 93, Legacy Rep: 3967
    Location: Eustis, FL

    PAR Yacht Designer/Builder

    Much experience with Kevlar and other "too light" materials Bataan?
     
  7. BATAAN
    Joined: Apr 2010
    Posts: 1,614
    Likes: 101, Points: 0, Legacy Rep: 1151
    Location: USA

    BATAAN Senior Member

    No, I do not have that experience, but I worked as the wood lamination repair tech in a yard that used the materials and observed as much as I could. Yes, they are very much stronger when properly engineered and built, long-lasting, non-corroding and really a wonderful boatbuilding tool. I especially like carbon spars for modern lug rigs like ROXANNE.
    The only problem I saw with high-tech was owners breaking the boats and complaining because the repair costs were so high. Sensible sailors would make a very light, highly stressed boat last a very long time and go anywhere on the planet they wished, idiots will screw anything up. The last ten years of around-the-world sleds is a great example of working high-tech, but at a cost.
    I favor heavy traditional stuff because it's so accessible, cheap and easy to fix. No bias against modern things, they just are fussy and costly for seemingly marginal return sometimes, not always of course.
    In major motion picture visual special effects where I have worked for years we have a saying that "90% of perfect is easy and cheap, it's the last 10% that will triple the budget". Same in boats maybe? Movie miniature in pic cost $300k to build plus $200k filming, but in the film you can't tell the difference between her and the 4 times larger LADY WASHINGTON. That's the last 10%, like a kevlar/carbon engineered fast sailing boat over a light wooden boat or f/g of similar design.
    Some customers want the best, are willing to pay for it, and will get it from a craft shop that knows its stuff.
     

    Attached Files:


  8. rwatson
    Joined: Aug 2007
    Posts: 6,163
    Likes: 495, Points: 83, Legacy Rep: 1749
    Location: Tasmania,Australia

    rwatson Senior Member

    Pound for pound, fibreglass is a lot stronger than steel. You are probably best to get a very heavy fibreglass bottom built, the boat will be lighter for the same strength as steel, so will have less impact with obstacles.

    large commercial fishing boats, minesweepers and other large commercial boats are built using very thick fibreglass.

    Also. combining fibreglass and steel can be problematic due to expansion differences, moisture entrapment etc tec
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.